PRACTICAL MEASUREMENT AND CALCULATION TO CONTROL THE STRIP SHAPE IN CONTINOUS COLD ROLLING

Zou Jiaxiang; Huang Huaqing; Kang Guixin; Gao Wenyi; Wu Fuyuan

doi:10.13374/j.issn1001-053x.1984.s1.017

Volume 6 Issue S1

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1984 > 6(S1): 20-33

Zou Jiaxiang, Huang Huaqing, Kang Guixin, Gao Wenyi, Wu Fuyuan. PRACTICAL MEASUREMENT AND CALCULATION TO CONTROL THE STRIP SHAPE IN CONTINOUS COLD ROLLING[J]. Chinese Journal of Engineering, 1984, 6(S1): 20-33. doi: 10.13374/j.issn1001-053x.1984.s1.017

Citation:

Zou Jiaxiang, Huang Huaqing, Kang Guixin, Gao Wenyi, Wu Fuyuan. PRACTICAL MEASUREMENT AND CALCULATION TO CONTROL THE STRIP SHAPE IN CONTINOUS COLD ROLLING[J]. Chinese Journal of Engineering, 1984, 6(S1): 20-33. doi: 10.13374/j.issn1001-053x.1984.s1.017

Citation:

PDF( 1044 KB)

PRACTICAL MEASUREMENT AND CALCULATION TO CONTROL THE STRIP SHAPE IN CONTINOUS COLD ROLLING

doi: 10.13374/j.issn1001-053x.1984.s1.017

Available Online: 2021-11-08

Abstract

Abstract

It is important to improve the quality of strip shape in present production. This paper offers some key factors which affect the strip shape, such as the original shape, patterns of work and back-up rolls, disposed of bending force and heat crown through the practical measurement and the theoratical calculation, in order to obtain an optimium strip shape.