The Static Bending Strength of V-Ti Nodular Cast Iron Gears

Zhou Jianliang; Zhu Xiaolu

doi:10.13374/j.issn1001-053x.1991.06.028

Volume 13 Issue 6

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1991 > 13(6): 566-571

Zhou Jianliang, Zhu Xiaolu. The Static Bending Strength of V-Ti Nodular Cast Iron Gears[J]. Chinese Journal of Engineering, 1991, 13(6): 566-571. doi: 10.13374/j.issn1001-053x.1991.06.028

Citation:

Zhou Jianliang, Zhu Xiaolu. The Static Bending Strength of V-Ti Nodular Cast Iron Gears[J]. Chinese Journal of Engineering, 1991, 13(6): 566-571. doi: 10.13374/j.issn1001-053x.1991.06.028

Zhou Jianliang, Zhu Xiaolu. The Static Bending Strength of V-Ti Nodular Cast Iron Gears[J]. Chinese Journal of Engineering, 1991, 13(6): 566-571. doi: 10.13374/j.issn1001-053x.1991.06.028

Citation:

Zhou Jianliang, Zhu Xiaolu. The Static Bending Strength of V-Ti Nodular Cast Iron Gears[J]. Chinese Journal of Engineering, 1991, 13(6): 566-571. doi: 10.13374/j.issn1001-053x.1991.06.028

PDF( 511 KB)

The Static Bending Strength of V-Ti Nodular Cast Iron Gears

doi: 10.13374/j.issn1001-053x.1991.06.028

Department of Mechanical Engineering

Received Date: 1990-10-04
Available Online: 2021-10-26

Abstract

Abstract

Based on a large number of test results for the V-Ti nodular cast iron gears the relationship between remains deformation σ and static bending strength limit σ_Flims was obtained. This result further confirms that the static bending strength of gears depends on the ratio of remains deformation to module.
- gear strength,
- nodular cast iron,
- remains deformation,
- bending stress,
- ratio of remains deformation to module