A Dynamic Recrystallization Model of Al-alloys

Lin Junpin; An Xiyong; Lei Tingquan

doi:10.13374/j.issn1001-053x.1993.03.022

Volume 15 Issue 3

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1993 > 15(3): 262-266

Lin Junpin, An Xiyong, Lei Tingquan. A Dynamic Recrystallization Model of Al-alloys[J]. Chinese Journal of Engineering, 1993, 15(3): 262-266. doi: 10.13374/j.issn1001-053x.1993.03.022

Citation:

Lin Junpin, An Xiyong, Lei Tingquan. A Dynamic Recrystallization Model of Al-alloys[J]. Chinese Journal of Engineering, 1993, 15(3): 262-266. doi: 10.13374/j.issn1001-053x.1993.03.022

Lin Junpin, An Xiyong, Lei Tingquan. A Dynamic Recrystallization Model of Al-alloys[J]. Chinese Journal of Engineering, 1993, 15(3): 262-266. doi: 10.13374/j.issn1001-053x.1993.03.022

Citation:

Lin Junpin, An Xiyong, Lei Tingquan. A Dynamic Recrystallization Model of Al-alloys[J]. Chinese Journal of Engineering, 1993, 15(3): 262-266. doi: 10.13374/j.issn1001-053x.1993.03.022

PDF( 652 KB)

A Dynamic Recrystallization Model of Al-alloys

doi: 10.13374/j.issn1001-053x.1993.03.022

1. University of Science and Technology Beijing;
2. Harbin Institute of Technology

Received Date: 1992-09-08
Available Online: 2021-10-18

Abstract

Abstract

A parameter K_max indicating the nature of the materials has been suggested by present work with which the Al-alloys can be classified into two categories:in alloys with K_max<0.1 only continuous dynamic recrystallization can occur and it cannot proceed completely; in alloys with K_max>0.1 occurs only dynamic recrystallization. The characteristics of the dynamic recrystallization of Al-alloys has been discussed.
- Al-alloy,
- dynamic recrystallization,
- hot deformation