Effect of Reanodizing Technological Factors on Friction Coefficient

Jiang Guang; Li Jiuqing; Xu Yuan; Xiao Heng

doi:10.13374/j.issn1001-053x.1993.04.019

Volume 15 Issue 4

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1993 > 15(4): 419-423

Jiang Guang, Li Jiuqing, Xu Yuan, Xiao Heng. Effect of Reanodizing Technological Factors on Friction Coefficient[J]. Chinese Journal of Engineering, 1993, 15(4): 419-423. doi: 10.13374/j.issn1001-053x.1993.04.019

Citation:

Jiang Guang, Li Jiuqing, Xu Yuan, Xiao Heng. Effect of Reanodizing Technological Factors on Friction Coefficient[J]. Chinese Journal of Engineering, 1993, 15(4): 419-423. doi: 10.13374/j.issn1001-053x.1993.04.019

Citation:

PDF( 445 KB)

Effect of Reanodizing Technological Factors on Friction Coefficient

doi: 10.13374/j.issn1001-053x.1993.04.019

2. Department of Surface Science and Corrosion Engineering

Received Date: 1992-11-18
Available Online: 2021-10-18

Abstract

Abstract

The effect of reanodizing techological factors on friction coefficient of lubricant anodic film was investigaed. Results revealed that the influence of reanodizing current density pH value and concentration of (NH₄)₂MoS₄ solution on friction coefficient were all indirect. The colorness of reanodizing film was adjusted by these factors connected with reanodizing time. High temperature post-treatment, particularly in Ar₂ environment, could further more lower friction coefficient. Also the mechanism of lowering of friction coefficient after reanodizng treatment was discussed.
- aluminium,
- anodizing,
- reanodizing,
- lubricant film,
- friction coefficient