Sinter of Mechanical Activated Molybdenum-Copper Powder

Li Xiaohong; Jie Zizhang; Yang Rang; Hu Shuwen

doi:10.13374/j.issn1001-053x.1996.05.006

Volume 18 Issue 5

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1996 > 18(5): 424-427

Li Xiaohong, Jie Zizhang, Yang Rang, Hu Shuwen. Sinter of Mechanical Activated Molybdenum-Copper Powder[J]. Chinese Journal of Engineering, 1996, 18(5): 424-427. doi: 10.13374/j.issn1001-053x.1996.05.006

Citation:

Li Xiaohong, Jie Zizhang, Yang Rang, Hu Shuwen. Sinter of Mechanical Activated Molybdenum-Copper Powder[J]. Chinese Journal of Engineering, 1996, 18(5): 424-427. doi: 10.13374/j.issn1001-053x.1996.05.006

Citation:

PDF( 321 KB)

Sinter of Mechanical Activated Molybdenum-Copper Powder

doi: 10.13374/j.issn1001-053x.1996.05.006

1. Department of Materials Science and Engineering, USTB, Beijing 100083, PRC;
2. Practice Factory, USTB

Received Date: 1995-11-03
Available Online: 2021-11-13

Abstract

Abstract

The mechanical activation, sintering property and alloy structure of Mo-Cu powder were studied. The experimental results showed that the lamellar structure had been obtained after ball milling, the alloy density sintered to 99% at lower LPS temperatrue,and the final structure was homogeneous with fine Mo particles.
- Mo-Cu alloy,
- mechanical activation,
- LPS