Contact Surface of Cross Wedge Rolling during Wedge

Wang Baoyu; Hu Zhenghuan

doi:10.13374/j.issn1001-053x.1998.02.039

Volume 20 Issue 2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1998 > 20(2): 169-173

Wang Baoyu, Hu Zhenghuan. Contact Surface of Cross Wedge Rolling during Wedge[J]. Chinese Journal of Engineering, 1998, 20(2): 169-173. doi: 10.13374/j.issn1001-053x.1998.02.039

Citation:

Wang Baoyu, Hu Zhenghuan. Contact Surface of Cross Wedge Rolling during Wedge[J]. Chinese Journal of Engineering, 1998, 20(2): 169-173. doi: 10.13374/j.issn1001-053x.1998.02.039

Wang Baoyu, Hu Zhenghuan. Contact Surface of Cross Wedge Rolling during Wedge[J]. Chinese Journal of Engineering, 1998, 20(2): 169-173. doi: 10.13374/j.issn1001-053x.1998.02.039

Citation:

Wang Baoyu, Hu Zhenghuan. Contact Surface of Cross Wedge Rolling during Wedge[J]. Chinese Journal of Engineering, 1998, 20(2): 169-173. doi: 10.13374/j.issn1001-053x.1998.02.039

PDF( 372 KB)

Contact Surface of Cross Wedge Rolling during Wedge

doi: 10.13374/j.issn1001-053x.1998.02.039

Mechanical Engineering School, UST Beijing, Beijing 100083, China

Received Date: 1997-05-21
Available Online: 2021-08-27

Abstract

Abstract

Based on the analysis of the process of cross wedge rolling at the first stage wedge in,the geometry model of rolling area has been established. The contact surface equations and boundary curve equations have been deduced. Contact surface of cross wedge rolling in different conditions and stage has obtained.
- cross wedge,
- rolling,
- contact surface