Simulation of strip deformation in process of tension leveling

LI Zhongfu; WANG Wenguang; BAI Jian; XU Xiaoming

doi:10.13374/j.issn1001-053x.2007.s2.069

Volume 29 Issue S2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2007 > 29(S2): 137-139

LI Zhongfu, WANG Wenguang, BAI Jian, XU Xiaoming. Simulation of strip deformation in process of tension leveling[J]. Chinese Journal of Engineering, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

Citation:

LI Zhongfu, WANG Wenguang, BAI Jian, XU Xiaoming. Simulation of strip deformation in process of tension leveling[J]. Chinese Journal of Engineering, 2007, 29(S2): 137-139. doi: 10.13374/j.issn1001-053x.2007.s2.069

Citation:

PDF( 288 KB)

Simulation of strip deformation in process of tension leveling

doi: 10.13374/j.issn1001-053x.2007.s2.069

1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. China National Machinery and Equipment Import and Export Corporation, Beijing 100055, China

Received Date: 2007-09-09
Available Online: 2021-08-16

Abstract

Abstract

The characterization of tensile-bend deformation was the core of tension leveling technology and the essence of tensile-bend deformation was cyclic repeated bend of steel strip with tension.The tension leveling simulation model,which could simulate cyclic reserved bend of steel strip with tension,was established.The mechanism of strip plastic extension and flatness leveling was discovered by the results of simulation and analysis,and the application schedule of tension leveling technology was put forward.
- steel strip,
- tension leveling,
- simulation,
- tension leveling technology