Citation: | XI Xiao-jun, LAI Chao-bin, LI Jing-she, WANG Zhi-gang, SUN Le-fei, CHEN Ying-jun. Effect of Y-base rare earth on the microstructure and impact toughness of E36 steel plate[J]. Chinese Journal of Engineering, 2017, 39(2): 244-250. doi: 10.13374/j.issn2095-9389.2017.02.012 |
[2] |
Wilson W G, Kay D A R, Vahed A. The use of thermodynamics and phase equilibriums to predict the behavior of the rare earth elements in steel. JOM, 1974, 26(5):14
|
[3] |
Luyckx L, Bell J R, McLean A, et al.Sulfide shape control in high strength low alloy steels. Metall Mater Trans B, 1970, 1(12):3341
|
[4] |
Alan D, Kay R. High temperature thermodynamics and applications of rare earth oxides and sulphides in ferrous metallurgy.Mineral Processing and Extractive Metallurgy Review:An International Journal, 1992, 10(1):307
|
[5] |
Shi L Q, Chen J Z,Northwood D O. Inclusion control in a 16 Mn steel using a combined rare earth and calcium treatment. J Mater Eng, 1991, 13(4):273
|
[6] |
Liu H L, Liu C J, Jiang M F. Effect of rare earths on impact toughness of a low-carbon steel.Mater Des, 2012, 33:306
|
[7] |
Lan J, He J J, Ding W J, et al. Effect of rare earth metals on the microstructure and impact toughness of a cast 0.4C-5Cr-1.2-Mo-1.0Vsteel. ISIJ Int, 2000, 40(12):1275
|
[9] |
Liu X, Liang J L. Effect of rare earth metals on microstructure and impact property of duplex stainless steel.Adv Mater Res, 2013, 662:424
|
[10] |
Liu X, Wang L M. Effect of rare earth metals on inclusions and impact property of 2205 duplex stainless steel.Adv Mater Res, 2012, 472-475:411
|
[14] |
Li C L, Wang Y S, Chen J J, et al. Effect of rare earth on structure and mechanical properties of clean BNbRE steel.J Rare Earths, 2005, 23(4):470
|
[15] |
Liu C J, Huang Y H, Jiang M F. Effects and mechanisms of RE on impact toughness and fracture toughness of clean heavy rail steel.J Iron Steel Res Int, 2011, 18(3):52
|
[23] |
Kwon S K, Park J S, Park J H. Influence of refractory steel interfacial reaction on the formation behavior of inclusions in Ce-containing stainless steel. ISIJ Int, 2015, 55(12):2589
|