An Analysis for Press-Shear Deformation of Metals
-
摘要: 本文用剛塑性有限元法分析了對稱壓縮與壓剪變形,計算與實測結果一致。結果表明,壓剪變形能降低壓頭與試樣接觸面上的正壓力,并使試樣內部變形比較均勻。Abstract: In this paper, both symmetrical press and press-shear deformation are analyzed by means of rigid plastic finite element method. The calculation results are in good agreement with experiments It shows that the press-shear deformation can lower the normal pressure on the die-specimen interface and rnake the inside deformation more homogen eous.
-
Key words:
- finite element analysis /
- press-shear deformation /
- compression of metals
-
點擊查看大圖
計量
- 文章訪問數: 235
- HTML全文瀏覽量: 55
- PDF下載量: 8
- 被引次數: 0
下載:
