FGH95和Rene'95合金熱誘導孔隙的研究

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

FGH95和Rene'95合金熱誘導孔隙的研究

王盤鑫, 鄒仲元

文章導航 > 工程科學學報 > 1987 > 9(S1): 118-123

王盤鑫, 鄒仲元. FGH95和Rene'95合金熱誘導孔隙的研究[J]. 工程科學學報, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

引用本文:

王盤鑫, 鄒仲元. FGH95和Rene'95合金熱誘導孔隙的研究[J]. 工程科學學報, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

Wang Panxin, Zou Zhongyuan. The Study of Thermally Induced Porosity （TIP） in FGH95 and Rene' 95 P/M Superalloy[J]. Chinese Journal of Engineering, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

Citation:

Wang Panxin, Zou Zhongyuan. The Study of Thermally Induced Porosity （TIP） in FGH95 and Rene' 95 P/M Superalloy[J]. Chinese Journal of Engineering, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

王盤鑫, 鄒仲元. FGH95和Rene'95合金熱誘導孔隙的研究[J]. 工程科學學報, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

引用本文:

王盤鑫, 鄒仲元. FGH95和Rene'95合金熱誘導孔隙的研究[J]. 工程科學學報, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

Wang Panxin, Zou Zhongyuan. The Study of Thermally Induced Porosity （TIP） in FGH95 and Rene' 95 P/M Superalloy[J]. Chinese Journal of Engineering, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

Citation:

Wang Panxin, Zou Zhongyuan. The Study of Thermally Induced Porosity （TIP） in FGH95 and Rene' 95 P/M Superalloy[J]. Chinese Journal of Engineering, 1987, 9(S1): 118-123. doi: 10.13374/j.issn1001-053x.1987.s1.016

FGH95和Rene'95合金熱誘導孔隙的研究

doi: 10.13374/j.issn1001-053x.1987.s1.016

王盤鑫¹,
鄒仲元²

1. 北京鋼鐵學院;
2. 航空部621所

計量
- 文章訪問數: 351
- HTML全文瀏覽量: 103
- PDF下載量: 12
- 被引次數: 0
出版歷程
- 網絡出版日期: 2021-10-28
- 刊出日期: 2021-10-28

The Study of Thermally Induced Porosity （TIP） in FGH95 and Rene' 95 P/M Superalloy

Wang Panxin¹,
Zou Zhongyuan²

摘要: 本文通過測定FGH95和Rene'95高溫合金,末經熱等靜壓制,在固溶處理前后的密度變化,研究了熱等靜壓制品中熱誘導孔隙（TIP）發生、發展的規律。研究表明:熱誘導孔隙隨固溶處理溫度的升高而增加,隨固溶處理時間的延長而增多。初步確定熱誘導孔隙檢驗中的兩個具體參數一固溶溫度和時間。

Abstract: The densities of HIPed compact of Rene'95 P/M superalloy were measured before and after the solution heat treatment to study the formation of TIP, and it's changes during heat treatment. The present work has found that the amount of TIP increases with the increase of temperature and the time of heating.The temperature and the time of the heat treatment are two important factors for the specification of TIP in powder metallurgy superalloys.

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 351
HTML全文瀏覽量: 103
PDF下載量: 12
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看