振動出礦機工作參數電算優化

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

振動出礦機工作參數電算優化

賴森華, 黃存紹, 童光煦

文章導航 > 工程科學學報 > 1987 > 9(S2): 8-16

賴森華, 黃存紹, 童光煦. 振動出礦機工作參數電算優化[J]. 工程科學學報, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

引用本文:

賴森華, 黃存紹, 童光煦. 振動出礦機工作參數電算優化[J]. 工程科學學報, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

Lai Senhua, Huang Cunshao, Tong Guangxu. Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer[J]. Chinese Journal of Engineering, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

Citation:

Lai Senhua, Huang Cunshao, Tong Guangxu. Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer[J]. Chinese Journal of Engineering, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

賴森華, 黃存紹, 童光煦. 振動出礦機工作參數電算優化[J]. 工程科學學報, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

引用本文:

賴森華, 黃存紹, 童光煦. 振動出礦機工作參數電算優化[J]. 工程科學學報, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

Lai Senhua, Huang Cunshao, Tong Guangxu. Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer[J]. Chinese Journal of Engineering, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

Citation:

Lai Senhua, Huang Cunshao, Tong Guangxu. Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer[J]. Chinese Journal of Engineering, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

振動出礦機工作參數電算優化

doi: 10.13374/j.issn1001-053x.1987.s2.015

采礦教研室

計量
- 文章訪問數: 241
- HTML全文瀏覽量: 73
- PDF下載量: 8
- 被引次數: 0
出版歷程
- 網絡出版日期: 2021-10-28

Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer

摘要: 本文在分析振動出礦動力學問題的基礎上,建立了包括放礦生產能力、單位礦量能耗和物料干擾強度在內的三個振動出礦效果衡量指標。應用電子計算機對單軸和雙軸慣性振動出礦機分別進行了工作參數最優化分析。室內模型試驗的結果表明,本文所提出的最佳工作參數及其實用的計算公式是易行和基本可靠的。
- 振動出礦 /
- 工作參數 /
- 電算優化 /
- 模型試驗
Abstract: After analyzing the dynamic properties of vibrating drawing system, the loading capacity, unit energy comsumption and interfere strength of vibrated material have been put forwards as the indexes evaluating the loading effect of vibrating feeder.For both uniaxial and biaxial vibrating feeders, the optimization of operating parameters has been completed by means of the electronic computer.The results of our model tests show that the operating parameters optimized for the feeders and the formulas about them are dependable and easy to carry out.
- vibrating drawing /
- operating parameter /
- optimizing by electronic computer /
- model test

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 241
HTML全文瀏覽量: 73
PDF下載量: 8
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看