鐵水中噴吹MoO<sub>3</sub>直接還原及合金化

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

鐵水中噴吹MoO₃直接還原及合金化

沈定釗, 吳春京, 鄒樂平

文章導航 > 工程科學學報 > 1988 > 10(1): 7-11

沈定釗, 吳春京, 鄒樂平. 鐵水中噴吹MoO3直接還原及合金化[J]. 工程科學學報, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

引用本文:

沈定釗, 吳春京, 鄒樂平. 鐵水中噴吹MoO₃直接還原及合金化[J]. 工程科學學報, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

Shen Dingzhao, Wu Chunjing, Zou Leping. On Direct Reducing and Alloying by the Method of Injecting MoO3 into Melt Iron[J]. Chinese Journal of Engineering, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

Citation:

Shen Dingzhao, Wu Chunjing, Zou Leping. On Direct Reducing and Alloying by the Method of Injecting MoO₃ into Melt Iron[J]. Chinese Journal of Engineering, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

沈定釗, 吳春京, 鄒樂平. 鐵水中噴吹MoO3直接還原及合金化[J]. 工程科學學報, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

引用本文:

沈定釗, 吳春京, 鄒樂平. 鐵水中噴吹MoO₃直接還原及合金化[J]. 工程科學學報, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

Shen Dingzhao, Wu Chunjing, Zou Leping. On Direct Reducing and Alloying by the Method of Injecting MoO3 into Melt Iron[J]. Chinese Journal of Engineering, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

Citation:

Shen Dingzhao, Wu Chunjing, Zou Leping. On Direct Reducing and Alloying by the Method of Injecting MoO₃ into Melt Iron[J]. Chinese Journal of Engineering, 1988, 10(1): 7-11. doi: 10.13374/j.issn1001-053x.1988.01.002

鐵水中噴吹MoO₃直接還原及合金化

doi: 10.13374/j.issn1001-053x.1988.01.002

鑄工教研室

計量
- 文章訪問數: 198
- HTML全文瀏覽量: 71
- PDF下載量: 8
- 被引次數: 0
出版歷程
- 收稿日期: 1987-02-19
- 網絡出版日期: 2021-11-15

On Direct Reducing and Alloying by the Method of Injecting MoO₃ into Melt Iron

摘要: 本文討論了在鐵水中鋁被直接還原的可能性;比較了噴吹法和團塊法的處理效果;研究了鉬對鐵水的合金化作用。發現在1300-1550即1550℃溫度范圍內,在工業鐵水中鉬的直接還原和合金化可以同時完成。噴吹法比其它加入法能得到較好的效果。如這種新技術應用在工業上,可獲得顯著的經濟效益。
- 三氧化鉬 /
- 直接還原 /
- 合金化 /
- 噴吹
Abstract: This paper discussed the posibility of reduction of molybdenum directly in melt iron, compared the effect of treated method of injection with briquette; made experimental rcsearchs on the effect of alloying for molybdenum on melt iron. It has been found that direct reduction of molybdenum and alloying may be completed simultaneously in industrial melt iron when the temperature is 1300~1550℃.Generally speaking, the injecting method may get better effect than another one.The economical profit will be remarkable when this new technique is successfuly used in the industry.
- molybdenum oxide /
- direct reduction /
- alloying /
- injection

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 198
HTML全文瀏覽量: 71
PDF下載量: 8
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看