The Production of the Coating of Stainless Steel by Electrodeposition
-
摘要: 本文用電化學方法制備 Fe-Cr-Ni 合金鍍層。討論了電沉積條件對形成 304不銹鋼錠層的影響。實驗結果指出:在常溫、低的pH值及適當的電流密度下,鍍液中的Cr3+和Ni2+含量達到一定的比值,可以獲得成分與不銹鋼(18Cr/9Ni)相似的鐵鉻鎳合金鍍層。Abstract: In this paper using electrochemical method the coatings ofFe-Cr-Ni alloy was prepared. The effect of electrodeposition conditions on forming coatings of 304 stainless steel was discussed. The results indicated that when the content of Cr3+ and Ni2+ in the bath is to a certain ratio, a Fe-Cr-Ni alloy coatings corresponding to the composition 304 stainless steel (18Cr/9Ni) can be obtained at normal atmospheric temperature, lower pH values and proper current.
-
Key words:
- electrodeposition /
- stainless steel /
- coating
-
點擊查看大圖
計量
- 文章訪問數: 263
- HTML全文瀏覽量: 74
- PDF下載量: 10
- 被引次數: 0
下載:
