WMVE工藝——一種制取M<sub>2</sub>粉末高速鋼棒材的新工藝

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

WMVE工藝——一種制取M₂粉末高速鋼棒材的新工藝

宋箭平, 夏元洛, 葛昌純

文章導航 > 工程科學學報 > 1991 > 13(S2): 13-19

宋箭平, 夏元洛, 葛昌純. WMVE工藝——一種制取M2粉末高速鋼棒材的新工藝[J]. 工程科學學報, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

引用本文:

宋箭平, 夏元洛, 葛昌純. WMVE工藝——一種制取M₂粉末高速鋼棒材的新工藝[J]. 工程科學學報, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

Song Jianping, Xia Yuanluo, Ge Changchun. WMVE Process——A New Process for Making High Speed Steel M2 Bars[J]. Chinese Journal of Engineering, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

Citation:

Song Jianping, Xia Yuanluo, Ge Changchun. WMVE Process——A New Process for Making High Speed Steel M2 Bars[J]. Chinese Journal of Engineering, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

宋箭平, 夏元洛, 葛昌純. WMVE工藝——一種制取M2粉末高速鋼棒材的新工藝[J]. 工程科學學報, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

引用本文:

宋箭平, 夏元洛, 葛昌純. WMVE工藝——一種制取M₂粉末高速鋼棒材的新工藝[J]. 工程科學學報, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

Song Jianping, Xia Yuanluo, Ge Changchun. WMVE Process——A New Process for Making High Speed Steel M2 Bars[J]. Chinese Journal of Engineering, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

Citation:

Song Jianping, Xia Yuanluo, Ge Changchun. WMVE Process——A New Process for Making High Speed Steel M2 Bars[J]. Chinese Journal of Engineering, 1991, 13(S2): 13-19. doi: 10.13374/j.issn1001-053x.1991.s2.003

WMVE工藝——一種制取M₂粉末高速鋼棒材的新工藝

doi: 10.13374/j.issn1001-053x.1991.s2.003

特種陶瓷粉末冶金研究室

計量
- 文章訪問數: 259
- HTML全文瀏覽量: 60
- PDF下載量: 6
- 被引次數: 0
出版歷程
- 收稿日期: 1991-05-13
- 網絡出版日期: 2021-10-26

WMVE Process——A New Process for Making High Speed Steel M2 Bars

Laboratory of Special Ceramics and Powder Metallurgy

摘要: 通過對高氧含量水霧化M₂高速鋼粉(W)的磁選(M)、真空松裝燒結(V)及熱擠壓(E)的研究,提出了WMVB新工藝。用這種工藝不僅能以高氧含量的水霧化粉末生產性能與熔煉鋼相當的冶金產品,而且經濟可行,適用于我國當前的冶金工業。
- 高氧含量 /
- 水霧化粉 /
- 高速鋼棒材
Abstract: A new process-WMVE process has been developed after investigations on magnetic separation(M), vacuum loose sintering(V) and hot extrusion (E) of water atomized powders(W) with high oxygen contents. Metallurgical products with properties which are equivalent to those of melted steel can be produced with this process cost-effectively. WMVE process is suitable to be used in present Chinese metallurgical industry.
- high oxygen content /
- water atomized powders /
- M2 HSS bar

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 259
HTML全文瀏覽量: 60
PDF下載量: 6
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看