含鈦鋼的奧氏體晶粒粗化與再結晶參數

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

含鈦鋼的奧氏體晶粒粗化與再結晶參數

黎秀球, 崔文暄

文章導航 > 工程科學學報 > 1993 > 15(1): 82-85

黎秀球, 崔文暄. 含鈦鋼的奧氏體晶粒粗化與再結晶參數[J]. 工程科學學報, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

引用本文:

黎秀球, 崔文暄. 含鈦鋼的奧氏體晶粒粗化與再結晶參數[J]. 工程科學學報, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

Li Xiuqiu, Cui Wenxuan. Austenite Grain Coarsening and Recrystallization Parameters of Steel Containing Titanium[J]. Chinese Journal of Engineering, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

Citation:

Li Xiuqiu, Cui Wenxuan. Austenite Grain Coarsening and Recrystallization Parameters of Steel Containing Titanium[J]. Chinese Journal of Engineering, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

黎秀球, 崔文暄. 含鈦鋼的奧氏體晶粒粗化與再結晶參數[J]. 工程科學學報, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

引用本文:

黎秀球, 崔文暄. 含鈦鋼的奧氏體晶粒粗化與再結晶參數[J]. 工程科學學報, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

Li Xiuqiu, Cui Wenxuan. Austenite Grain Coarsening and Recrystallization Parameters of Steel Containing Titanium[J]. Chinese Journal of Engineering, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

Citation:

Li Xiuqiu, Cui Wenxuan. Austenite Grain Coarsening and Recrystallization Parameters of Steel Containing Titanium[J]. Chinese Journal of Engineering, 1993, 15(1): 82-85. doi: 10.13374/j.issn1001-053x.1993.01.014

含鈦鋼的奧氏體晶粒粗化與再結晶參數

doi: 10.13374/j.issn1001-053x.1993.01.014

材料科學與工程系

作者簡介:
黎秀球,女,55,副教授

計量
- 文章訪問數: 263
- HTML全文瀏覽量: 76
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 1992-06-17
- 網絡出版日期: 2021-10-18

Austenite Grain Coarsening and Recrystallization Parameters of Steel Containing Titanium

Department of Materials and Science and Engineering

摘要: 研究了3種不同含Ti量(0.04%-0.16%Ti)鋼奧氏體晶粒粗化溫度及熱軋后奧體再結晶的行為。在950-1200℃加熱,含0.04%Ti鋼奧氏體晶粒最小,其晶粒開始粗化溫度在1 150℃以上。得出含Ti鋼開始再結晶的臨界形變率(ε_c)與原始奧氏體晶粒直徑(D₀)、軋制溫度(T)間定量關系。
- 奧氏體晶粒 /
- 再結晶 /
- 臨界形變量 /
- 軋制溫度
Abstract: The temperature of austenite grain coarsening and recrystallization parameters in steels containing 0.04%-0.16% Ti have been investigated.Experimental results show that after heating at 950-1 200℃,austenite grain size in 0.04% Ti-steel was the finest, and the temperature of grain coarsening was above 1 150℃.The quantitative relationship between the critical reduction for austenite recrystallization ε_c and initinal austenite grain size D_o at rolling temperature T has been obtained
- austenite grain /
- recrystallization /
- critical reduction /
- rolling temperature

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 263
HTML全文瀏覽量: 76
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看