浸泡砂輪工藝及磨削機理

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

浸泡砂輪工藝及磨削機理

趙景華, 曲開宏

文章導航 > 工程科學學報 > 1994 > 16(5): 446-449

趙景華, 曲開宏. 浸泡砂輪工藝及磨削機理[J]. 工程科學學報, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

引用本文:

趙景華, 曲開宏. 浸泡砂輪工藝及磨削機理[J]. 工程科學學報, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

Zhao Jinghua, Qu Kaihong. The Research of Soaking Process of Grinding Wheels and Its Cutting Action[J]. Chinese Journal of Engineering, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

Citation:

Zhao Jinghua, Qu Kaihong. The Research of Soaking Process of Grinding Wheels and Its Cutting Action[J]. Chinese Journal of Engineering, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

趙景華, 曲開宏. 浸泡砂輪工藝及磨削機理[J]. 工程科學學報, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

引用本文:

趙景華, 曲開宏. 浸泡砂輪工藝及磨削機理[J]. 工程科學學報, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

Zhao Jinghua, Qu Kaihong. The Research of Soaking Process of Grinding Wheels and Its Cutting Action[J]. Chinese Journal of Engineering, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

Citation:

Zhao Jinghua, Qu Kaihong. The Research of Soaking Process of Grinding Wheels and Its Cutting Action[J]. Chinese Journal of Engineering, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

浸泡砂輪工藝及磨削機理

doi: 10.13374/j.issn1001-053x.1994.05.009

北京科技大學機械工程學院, 北京 100083

作者簡介:
趙景華女 56歲副教授

中圖分類號: TG580.11;TG580.6
計量
- 文章訪問數: 255
- HTML全文瀏覽量: 84
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 1994-02-23
- 網絡出版日期: 2021-11-13

The Research of Soaking Process of Grinding Wheels and Its Cutting Action

Mechanical Engineering Collage, USTB, Beijing 100083, PRC

摘要: 研究了碘化鉀浸泡剛玉系砂輪的磨削機理及最佳工藝.結果表明,采用碘化鉀浸泡剛玉系砂輪可減輕砂輪表面糊塞和粘屑現象,降低磨削溫度,減小磨削力,改善磨削表面質量,該方法簡單易行,成本低.
- 磨削 /
- 砂輪 /
- 高速工具鋼/高釩高速鋼
Abstract: This paper describes the optimized soaking process and its cutting action of the wheels soaked in KI solution. By employing the soaked wheel, the pores cloging and chip sticking on the surface of the wheel are greatly improved, which results in the lower cutting force and temperature and improved surface quality. Besides the simple soaking process, it is also convenient and inexpensive.
- gringing /
- abrasive wheel /
- high-speed tool steels/V-riched high-speed steels

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 255
HTML全文瀏覽量: 84
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看