熱加工中道次間殘余應變率對流動應力的影響

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

熱加工中道次間殘余應變率對流動應力的影響

管克智, 周紀華, 倫怡馨

文章導航 > 工程科學學報 > 1994 > 16(S2): 19-22

管克智, 周紀華, 倫怡馨. 熱加工中道次間殘余應變率對流動應力的影響[J]. 工程科學學報, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

引用本文:

管克智, 周紀華, 倫怡馨. 熱加工中道次間殘余應變率對流動應力的影響[J]. 工程科學學報, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

Guan Kezhi, Zhou Jihua, Lun Yixin. Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing[J]. Chinese Journal of Engineering, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

Citation:

Guan Kezhi, Zhou Jihua, Lun Yixin. Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing[J]. Chinese Journal of Engineering, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

管克智, 周紀華, 倫怡馨. 熱加工中道次間殘余應變率對流動應力的影響[J]. 工程科學學報, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

引用本文:

管克智, 周紀華, 倫怡馨. 熱加工中道次間殘余應變率對流動應力的影響[J]. 工程科學學報, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

Guan Kezhi, Zhou Jihua, Lun Yixin. Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing[J]. Chinese Journal of Engineering, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

Citation:

Guan Kezhi, Zhou Jihua, Lun Yixin. Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing[J]. Chinese Journal of Engineering, 1994, 16(S2): 19-22. doi: 10.13374/j.issn1001-053x.1994.s2.006

熱加工中道次間殘余應變率對流動應力的影響

doi: 10.13374/j.issn1001-053x.1994.s2.006

北京科技大學機械工程學院, 北京 100083

作者簡介:
管克智男 56歲教授

中圖分類號: TG301
計量
- 文章訪問數: 237
- HTML全文瀏覽量: 77
- PDF下載量: 6
- 被引次數: 0
出版歷程
- 收稿日期: 1994-03-01
- 網絡出版日期: 2021-11-13

Effect of Residual Strain Rate between Two Passes on Flow Stress during Hot Processing

Mechanical Engineering College, USTB, Beijing 100083, PRC

摘要: 采用恒應變速率凸輪式壓縮試驗機,測定研究了GCr15、16MnNb鋼在兩道次變形過程中,熱加工道次時間間隔對鋼流動應力及道次間軟化率的影響規律.
- 流動應力 /
- 熱加工 /
- 殘余應變 /
- 軟化率
Abstract: Using cam-type compression testing maching of the constant strain rate, interval between two passes affecting regular on flow stress and soften rate For steel GCr15 and 16MnNb is studied when hot precessing.
- flow stress /
- hot working /
- residual stress /
- soften rate

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 237
HTML全文瀏覽量: 77
PDF下載量: 6
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看