熱軋帶鋼精軋機主傳動系統振蕩現象的仿真

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

熱軋帶鋼精軋機主傳動系統振蕩現象的仿真

王京, 趙媛媛, 張勇軍, 丁蘊石

文章導航 > 工程科學學報 > 1999 > 21(6): 592-595

王京, 趙媛媛, 張勇軍, 丁蘊石. 熱軋帶鋼精軋機主傳動系統振蕩現象的仿真[J]. 工程科學學報, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

引用本文:

王京, 趙媛媛, 張勇軍, 丁蘊石. 熱軋帶鋼精軋機主傳動系統振蕩現象的仿真[J]. 工程科學學報, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

Wang Jing, Zhao Yuanyuan, Zhang Yongjun, Ding Yunshi. Simulation Results of Oscillation Occurring in the Electrical Supply System of a Hot Finishing Mill[J]. Chinese Journal of Engineering, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

Citation:

Wang Jing, Zhao Yuanyuan, Zhang Yongjun, Ding Yunshi. Simulation Results of Oscillation Occurring in the Electrical Supply System of a Hot Finishing Mill[J]. Chinese Journal of Engineering, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

王京, 趙媛媛, 張勇軍, 丁蘊石. 熱軋帶鋼精軋機主傳動系統振蕩現象的仿真[J]. 工程科學學報, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

引用本文:

王京, 趙媛媛, 張勇軍, 丁蘊石. 熱軋帶鋼精軋機主傳動系統振蕩現象的仿真[J]. 工程科學學報, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

Wang Jing, Zhao Yuanyuan, Zhang Yongjun, Ding Yunshi. Simulation Results of Oscillation Occurring in the Electrical Supply System of a Hot Finishing Mill[J]. Chinese Journal of Engineering, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

Citation:

Wang Jing, Zhao Yuanyuan, Zhang Yongjun, Ding Yunshi. Simulation Results of Oscillation Occurring in the Electrical Supply System of a Hot Finishing Mill[J]. Chinese Journal of Engineering, 1999, 21(6): 592-595. doi: 10.13374/j.issn1001-053x.1999.06.023

熱軋帶鋼精軋機主傳動系統振蕩現象的仿真

doi: 10.13374/j.issn1001-053x.1999.06.023

1. 北京科技大學信息工程學院, 北京 100083;
2. 冶金工業部自動化研究院, 北京 100071

作者簡介:
王京男,50歲,副教授

中圖分類號: TP391.9
計量
- 文章訪問數: 215
- HTML全文瀏覽量: 72
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 1999-07-09
- 網絡出版日期: 2021-08-27

Simulation Results of Oscillation Occurring in the Electrical Supply System of a Hot Finishing Mill

1. Information Engineering School, UST Beijing, Beijing 100083, China;
2. Automation Research institute of Minisny of Metallurgical industry, Beijing 100071, China

摘要: 分析武漢鋼鐵公司熱連軋精軋機組主傳動系統的振蕩原因,并用仿真計算結果定性地解釋了減小電網側無功補償裝置的容量或者在控制回路加裝帶通濾波器(BPF)將是有利于抑制諧波的振蕩現象的產生.還對改造為雙閉環控制系統的可行性進行了初步分析.
- 非特征諧波 /
- 無功補償裝置 /
- 精軋機主傳動系統
Abstract: The reason for oscillation occurring in the electrical supply system of a hot finishing mill is analyzed. The simulation results qualitatively show that either diminishing the capacity of var compensation systems in the electrical supply system or a band-passing filter (BPF) to be connected into the control system of the mill is capable damping the oscillation. The feasibility of the reconstructed two-loop control system is also analyzed tentatively.
- atypical harmonics /
- var compensation systems /
- main drive system of hot finishing mill

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 215
HTML全文瀏覽量: 72
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看