工藝參數對60Si2MnA鋼高速線材相變規律的影響

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

工藝參數對60Si2MnA鋼高速線材相變規律的影響

丁華, 劉雅政, 張立芬

文章導航 > 工程科學學報 > 2001 > 23(1): 28-31

丁華, 劉雅政, 張立芬. 工藝參數對60Si2MnA鋼高速線材相變規律的影響[J]. 工程科學學報, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

引用本文:

丁華, 劉雅政, 張立芬. 工藝參數對60Si2MnA鋼高速線材相變規律的影響[J]. 工程科學學報, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

DING Hua, LIU Yazheng, ZHANG Lifen. Effect of Processing Parameters on Phase Transition Rules of High Speed Rolled Wire of 60Si2MnA Steel[J]. Chinese Journal of Engineering, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

Citation:

DING Hua, LIU Yazheng, ZHANG Lifen. Effect of Processing Parameters on Phase Transition Rules of High Speed Rolled Wire of 60Si2MnA Steel[J]. Chinese Journal of Engineering, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

丁華, 劉雅政, 張立芬. 工藝參數對60Si2MnA鋼高速線材相變規律的影響[J]. 工程科學學報, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

引用本文:

丁華, 劉雅政, 張立芬. 工藝參數對60Si2MnA鋼高速線材相變規律的影響[J]. 工程科學學報, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

DING Hua, LIU Yazheng, ZHANG Lifen. Effect of Processing Parameters on Phase Transition Rules of High Speed Rolled Wire of 60Si2MnA Steel[J]. Chinese Journal of Engineering, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

Citation:

DING Hua, LIU Yazheng, ZHANG Lifen. Effect of Processing Parameters on Phase Transition Rules of High Speed Rolled Wire of 60Si2MnA Steel[J]. Chinese Journal of Engineering, 2001, 23(1): 28-31. doi: 10.13374/j.issn1001-053x.2001.01.034

工藝參數對60Si2MnA鋼高速線材相變規律的影響

doi: 10.13374/j.issn1001-053x.2001.01.034

1. 北京科技大學材料科學與工程學院, 北京 100083;
2. 鞍山鋼鐵(集團)公司, 鞍山 114021

作者簡介:
丁華男,28歲,碩士

中圖分類號: TG355.6
計量
- 文章訪問數: 190
- HTML全文瀏覽量: 40
- PDF下載量: 8
- 被引次數: 0
出版歷程
- 收稿日期: 2000-06-23

Effect of Processing Parameters on Phase Transition Rules of High Speed Rolled Wire of 60Si2MnA Steel

1. Material Science and Engineering School, UST Beijing, Beijing100083, China;
2. Anshan Iron and Steel Corporation, Anshan 114021, China

摘要: 通過熱模擬機Gleeble-1500對終軋溫度和控制冷卻過程的模擬,研究了60Si2MhA鋼高速線材生產的有關工藝參數,分析了終軋溫度、吐絲溫度及相變區冷卻速度對相變溫度的影響,得出其影響規律性的結論,并測定了該鋼種動態連續冷卻轉變(CCT)曲線.
- 60Si2MnA鋼 /
- 熱模擬試驗 /
- 工藝參數 /
- 相變
Abstract: Final temperature and controlled cooling process were simulated by Gleeble-1500 type hot simulation experiment machine. The rules that A_r1, and A_r3 Phase transition points of 60Si2MnA steel were effected by final temperature, laying head temperature and controlled cooling rate were studied, the dynamic continuous cooling transformation (CCT) curve of steel 60Si2MnA has been investigated.
- 60Si2MnA steel /
- heating simulating test /
- process parameter /
- phase transition

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 190
HTML全文瀏覽量: 40
PDF下載量: 8
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看