屈服強度800MPa的低碳微合金鋼

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

屈服強度800MPa的低碳微合金鋼

柳得櫓, 傅杰, 康永林, 王元立, 王艷麗, 迪林

文章導航 > 工程科學學報 > 2001 > 23(4): 357-361

柳得櫓, 傅杰, 康永林, 王元立, 王艷麗, 迪林. 屈服強度800MPa的低碳微合金鋼[J]. 工程科學學報, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

引用本文:

柳得櫓, 傅杰, 康永林, 王元立, 王艷麗, 迪林. 屈服強度800MPa的低碳微合金鋼[J]. 工程科學學報, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

LIU Delu, FU Jie, KANG Yonglin, WANG Yuanli, WANG Yanli, DI Lin. Microalloying Steels with 800 MPa Yield Strength[J]. Chinese Journal of Engineering, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

Citation:

LIU Delu, FU Jie, KANG Yonglin, WANG Yuanli, WANG Yanli, DI Lin. Microalloying Steels with 800 MPa Yield Strength[J]. Chinese Journal of Engineering, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

柳得櫓, 傅杰, 康永林, 王元立, 王艷麗, 迪林. 屈服強度800MPa的低碳微合金鋼[J]. 工程科學學報, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

引用本文:

柳得櫓, 傅杰, 康永林, 王元立, 王艷麗, 迪林. 屈服強度800MPa的低碳微合金鋼[J]. 工程科學學報, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

LIU Delu, FU Jie, KANG Yonglin, WANG Yuanli, WANG Yanli, DI Lin. Microalloying Steels with 800 MPa Yield Strength[J]. Chinese Journal of Engineering, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

Citation:

LIU Delu, FU Jie, KANG Yonglin, WANG Yuanli, WANG Yanli, DI Lin. Microalloying Steels with 800 MPa Yield Strength[J]. Chinese Journal of Engineering, 2001, 23(4): 357-361. doi: 10.13374/j.issn1001-053x.2001.04.019

屈服強度800MPa的低碳微合金鋼

doi: 10.13374/j.issn1001-053x.2001.04.019

1. 北京科技大學材料物理與化學系, 北京 100083;
2. 北京科技大學冶金學院;
3. 北京科技大學壓力加工系

基金項目:

的環境行為與失效機理"的支持"

作者簡介:
柳得櫓女,教授

中圖分類號: TG142.1
計量
- 文章訪問數: 223
- HTML全文瀏覽量: 45
- PDF下載量: 19
- 被引次數: 0
出版歷程
- 收稿日期: 2001-02-12

Microalloying Steels with 800 MPa Yield Strength

1. Department of Material Physics and Chemistry, UST Beijing 100083 Beijing China;
2. Metallurgy School, UST Beijing;
3. Department of Metal Forming, UST Beijing

摘要: 研究了不同成分特征的含錳低碳微合金鋼通過往軋控冷后回火的組織與力學性能.Mn含量為1.7%~2.3%的試驗鋼軋后經快冷和中溫回火獲得了高強度和一定的塑性、韌性.其中含0.06% C,2.3% Mn,0.21% Al和微量Nb,Ti,B的快冷回火鋼屈服強度(σ_0.2)超過800MPa,延伸率大于14%,室溫沖擊韌性134~174.5 J/cm²,-40℃沖擊韌性為103-110J/cm²,具有由變形奧氏體轉變成的細小貝氏體組織.
- 高強度微合金鋼 /
- 變形奧氏體的貝氏體轉變 /
- 組織與性能 /
- 含硼鋼
Abstract: Mecbanical Properties and microstructure of low carbon manganese clean steels microalloyed with Nb, Ti, B were studied. High levels of yield strength (>800 MPa) have been attained in the tempered steel containing 0.06%C,2.3%Mn, 0.21%Al and small amount of Nb, Ti, V, B. The elongation elongation of this steel is more than 14% and V-notch toughness is 134~174.5 J/cm² and 103~110J/cm² at room temperature and -40 respectively. Very for bainitic structure (with lath width in micrometer or less) was observed in the steel. Effects of deformation as well as Al additive on the austenite-bainite transformation and mechanical properties have been investigated.
- clean micro-alloying steel /
- bainitic transformation /
- microstructure and mechanical properties /
- boron containing steel

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 223
HTML全文瀏覽量: 45
PDF下載量: 19
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看