CSP薄板表面裂紋的形成機理與預防措施

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

CSP薄板表面裂紋的形成機理與預防措施

周德光, 傅杰, 王忠丙, 柳得櫓, 康永林, 王元立

文章導航 > 工程科學學報 > 2002 > 24(4): 403-406

周德光, 傅杰, 王忠丙, 柳得櫓, 康永林, 王元立. CSP薄板表面裂紋的形成機理與預防措施[J]. 工程科學學報, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

引用本文:

周德光, 傅杰, 王忠丙, 柳得櫓, 康永林, 王元立. CSP薄板表面裂紋的形成機理與預防措施[J]. 工程科學學報, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

ZHOU Deguang, FU Jie, WANG Zhongbing, LIU Delu, KANG Yonglin, WANG Yuanli. Forming Mechanism and Preventive Measures of the Surface Crack in Thin Strip Produced by CSP[J]. Chinese Journal of Engineering, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

Citation:

ZHOU Deguang, FU Jie, WANG Zhongbing, LIU Delu, KANG Yonglin, WANG Yuanli. Forming Mechanism and Preventive Measures of the Surface Crack in Thin Strip Produced by CSP[J]. Chinese Journal of Engineering, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

周德光, 傅杰, 王忠丙, 柳得櫓, 康永林, 王元立. CSP薄板表面裂紋的形成機理與預防措施[J]. 工程科學學報, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

引用本文:

周德光, 傅杰, 王忠丙, 柳得櫓, 康永林, 王元立. CSP薄板表面裂紋的形成機理與預防措施[J]. 工程科學學報, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

ZHOU Deguang, FU Jie, WANG Zhongbing, LIU Delu, KANG Yonglin, WANG Yuanli. Forming Mechanism and Preventive Measures of the Surface Crack in Thin Strip Produced by CSP[J]. Chinese Journal of Engineering, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

Citation:

ZHOU Deguang, FU Jie, WANG Zhongbing, LIU Delu, KANG Yonglin, WANG Yuanli. Forming Mechanism and Preventive Measures of the Surface Crack in Thin Strip Produced by CSP[J]. Chinese Journal of Engineering, 2002, 24(4): 403-406. doi: 10.13374/j.issn1001-053x.2002.04.005

CSP薄板表面裂紋的形成機理與預防措施

doi: 10.13374/j.issn1001-053x.2002.04.005

1. 北京科技大學冶金學院, 北京 100083;
2. 北京科技大學材料科學與工程學院, 北京 100083

基金項目:

“973”基金資助項目(No.G19980615)

作者簡介:
周德光男,38歲,高級工程師,博士后

中圖分類號: TF777.7
計量
- 文章訪問數: 258
- HTML全文瀏覽量: 81
- PDF下載量: 8
- 被引次數: 0
出版歷程
- 收稿日期: 2001-06-28
- 網絡出版日期: 2021-08-26

Forming Mechanism and Preventive Measures of the Surface Crack in Thin Strip Produced by CSP

1. Metallurgy School, UST Beijing, Beijing 100083, China;
2. Material Science and Engineering School, UST Beijing, Beijing 100083, China

摘要: 對薄板坯連鑄連軋生產線（CSP）生產的鋼板出現表面裂紋及邊裂進行了研究,并對CSP鋼板表面裂紋的形成機理及其影響因素進行了分析,提出了防止裂紋的措施.X-射線能譜分析結果表明:在基體與氧化鐵皮間的界面富集有銅等低熔點雜質元素,鋼中殘余元素含量偏高是產生表面裂紋的主要原因.
- CSP /
- 殘余元素 /
- 銅含量 /
- 表面裂紋
Abstract: The surface and fringe cracks in thin strips produced by CSP process were studied. The forming mechanism and involved influencing factors were analyzed and then the preventive measures were put forward. The test results show that the main factors causing surface crack on thin strip are the enrichment of impurity elements (Cu,Sn,Sb et al.) in the interface of matrix and iron scale as well as the upper contents of residual elements in steel.
- CSP /
- residual element /
- copper content /
- surface earek

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 258
HTML全文瀏覽量: 81
PDF下載量: 8
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看