兼顧板形的熱連軋機負荷分配的優化

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

兼顧板形的熱連軋機負荷分配的優化

羅永軍, 王長松, 曹建國, 金麗娜, 姚耕耘

文章導航 > 工程科學學報 > 2005 > 27(1): 94-97

羅永軍, 王長松, 曹建國, 金麗娜, 姚耕耘. 兼顧板形的熱連軋機負荷分配的優化[J]. 工程科學學報, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

引用本文:

羅永軍, 王長松, 曹建國, 金麗娜, 姚耕耘. 兼顧板形的熱連軋機負荷分配的優化[J]. 工程科學學報, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

LUO Yongjun, WANG Zhangsong, CAO Jianguo, JIN Lina, YAO Gengyun. Load distribution optimization helpful to shape control of hot strip mills[J]. Chinese Journal of Engineering, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

Citation:

LUO Yongjun, WANG Zhangsong, CAO Jianguo, JIN Lina, YAO Gengyun. Load distribution optimization helpful to shape control of hot strip mills[J]. Chinese Journal of Engineering, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

羅永軍, 王長松, 曹建國, 金麗娜, 姚耕耘. 兼顧板形的熱連軋機負荷分配的優化[J]. 工程科學學報, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

引用本文:

羅永軍, 王長松, 曹建國, 金麗娜, 姚耕耘. 兼顧板形的熱連軋機負荷分配的優化[J]. 工程科學學報, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

LUO Yongjun, WANG Zhangsong, CAO Jianguo, JIN Lina, YAO Gengyun. Load distribution optimization helpful to shape control of hot strip mills[J]. Chinese Journal of Engineering, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

Citation:

LUO Yongjun, WANG Zhangsong, CAO Jianguo, JIN Lina, YAO Gengyun. Load distribution optimization helpful to shape control of hot strip mills[J]. Chinese Journal of Engineering, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

兼顧板形的熱連軋機負荷分配的優化

doi: 10.13374/j.issn1001-053x.2005.01.024

1. 中國冶金設備總公司, 北京 100016;
2. 北京科技大學機械工程學院, 北京 100083

基金項目:

國家自然科學基金資助項目(No.598351700)國家"九五"科技攻關項目(No.95-527-01-02-04)

作者簡介:
羅永軍(1977-),男,博士

中圖分類號: TG333.71;TP273.1
計量
- 文章訪問數: 170
- HTML全文瀏覽量: 42
- PDF下載量: 7
- 被引次數: 0
出版歷程
- 收稿日期: 2004-03-29
- 修回日期: 2004-09-15
- 網絡出版日期: 2021-08-17

Load distribution optimization helpful to shape control of hot strip mills

1. China Metallurgical Equipment Corporation, Beijing 100016, China;
2. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China

摘要: 針對熱連軋過程中板形板厚綜合控制問題,提出了兼顧板形的負荷分配方法,并且使用免疫遺傳算法進行了參數優化.實驗數據對比分析表明,該方法是有效的,能夠實現板形板厚的綜合控制.
- 負荷分配 /
- 板形板厚 /
- 熱連軋 /
- 免疫遺傳算法
Abstract: The integrated control of gauge and shape in hot strip mills is important and difficult. Rolling force is the key factor of gauge control, also is one of the major factors of shape control. A strategy was introduced to optimize the load distribution helpful to shape control and the relative parameters were obtained by means of immune genetic algorithm. Experimental results show that the strategy is valid, which provides another way for the integrated control of gauge and shape and can be used to guide production in practice.
- load distribution /
- gauge and shape /
- hot strip mills /
- immune genetic algorithm

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 170
HTML全文瀏覽量: 42
PDF下載量: 7
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看