電脈沖處理對Sn-15%Pb合金凝固組織中枝晶形態的影響

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

電脈沖處理對Sn-15%Pb合金凝固組織中枝晶形態的影響

王靜松, 薛慶國, 石向東, 范方國, 許建國, 蒼大強

文章導航 > 工程科學學報 > 2005 > 27(2): 193-196

王靜松, 薛慶國, 石向東, 范方國, 許建國, 蒼大強. 電脈沖處理對Sn-15%Pb合金凝固組織中枝晶形態的影響[J]. 工程科學學報, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

引用本文:

王靜松, 薛慶國, 石向東, 范方國, 許建國, 蒼大強. 電脈沖處理對Sn-15%Pb合金凝固組織中枝晶形態的影響[J]. 工程科學學報, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

WANG Jingsong, XUE Qingguo, SHI Xiangdong, FAN Fangguo, XU Jianguo, CANG Daqiang. Effect of derect pulse modification process on solidification structure of Sn-15%Pb Alloy[J]. Chinese Journal of Engineering, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

Citation:

WANG Jingsong, XUE Qingguo, SHI Xiangdong, FAN Fangguo, XU Jianguo, CANG Daqiang. Effect of derect pulse modification process on solidification structure of Sn-15%Pb Alloy[J]. Chinese Journal of Engineering, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

王靜松, 薛慶國, 石向東, 范方國, 許建國, 蒼大強. 電脈沖處理對Sn-15%Pb合金凝固組織中枝晶形態的影響[J]. 工程科學學報, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

引用本文:

王靜松, 薛慶國, 石向東, 范方國, 許建國, 蒼大強. 電脈沖處理對Sn-15%Pb合金凝固組織中枝晶形態的影響[J]. 工程科學學報, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

WANG Jingsong, XUE Qingguo, SHI Xiangdong, FAN Fangguo, XU Jianguo, CANG Daqiang. Effect of derect pulse modification process on solidification structure of Sn-15%Pb Alloy[J]. Chinese Journal of Engineering, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

Citation:

WANG Jingsong, XUE Qingguo, SHI Xiangdong, FAN Fangguo, XU Jianguo, CANG Daqiang. Effect of derect pulse modification process on solidification structure of Sn-15%Pb Alloy[J]. Chinese Journal of Engineering, 2005, 27(2): 193-196. doi: 10.13374/j.issn1001-053x.2005.02.047

電脈沖處理對Sn-15%Pb合金凝固組織中枝晶形態的影響

doi: 10.13374/j.issn1001-053x.2005.02.047

北京科技大學冶金與生態工程學院, 北京 100083

基金項目:

國家"863"資助項目(No.2001AA337040)

作者簡介:
王靜松(1968-),男,講師,博士

中圖分類號: TG111.1
計量
- 文章訪問數: 186
- HTML全文瀏覽量: 37
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 2004-04-10
- 修回日期: 2004-09-01
- 網絡出版日期: 2021-08-17

Effect of derect pulse modification process on solidification structure of Sn-15%Pb Alloy

Metallurgical and Ecological Engineering School, University of Sciences and Technology Beijing, Beijing 100083, China

摘要: 研究了電脈沖處理對Sn-15%Pb合金凝固組織的影響.通過對Sn-15%Pb合金熔體施加電脈沖處理,其凝固組織發生了由原始的樹枝晶向球狀組織的轉化,同時晶粒發生明顯細化.分析認為,由于電脈沖處理作用,合金熔體結構發生了改變,使熔體中Pb的活度提高,進而引起溶質平衡分配系數的變化,導致凝固前沿的溶質富集減輕,溶質分布情況發生改變,促使樹枝晶向球狀組織轉化,并且使凝固組織發生細化.
- Sn-15%Pb合金 /
- 電脈沖 /
- 熔體結構 /
- 凝固組織 /
- 活度
Abstract: The influence of electric pulse modification (EPM) process on the solidification structure of Sn-15% Pb alloy was experimentally investigated. It was shown that after the molten alloy was treated by electric pulse the solidification structure changed from dendrite shape to cellular shape, and the grains were obviously fined. The mechanism of the change in solidification structure by EPM was discussed. The results indicated that EPM process makes the liquid structure of the alloy change:The activity of Pb in the molten Sn-Pb alloy increases, the distribution coefficient tends to 1, the solute enrichment in front of the solid-liquid interface decreases, and the solute distribution changes. All these lead to the change of solidification structure from dendrite to cellular.
- Sn-15%Pb alloy /
- electro-pulse /
- liquid structure /
- solidification structure /
- activity

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 186
HTML全文瀏覽量: 37
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看