冷軋帶鋼板形和表面粗糙度協同控制

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

冷軋帶鋼板形和表面粗糙度協同控制

張清東, 王文廣, 吳越, 王慧

文章導航 > 工程科學學報 > 2005 > 27(2): 232-234

張清東, 王文廣, 吳越, 王慧. 冷軋帶鋼板形和表面粗糙度協同控制[J]. 工程科學學報, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

引用本文:

張清東, 王文廣, 吳越, 王慧. 冷軋帶鋼板形和表面粗糙度協同控制[J]. 工程科學學報, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

ZHANG Qingdong, WANG Wenguang, WU Yue, WANG Hui. Coordinated control of flatness and surface roughness of strip on 2030 mm cold tandem mills[J]. Chinese Journal of Engineering, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

Citation:

ZHANG Qingdong, WANG Wenguang, WU Yue, WANG Hui. Coordinated control of flatness and surface roughness of strip on 2030 mm cold tandem mills[J]. Chinese Journal of Engineering, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

張清東, 王文廣, 吳越, 王慧. 冷軋帶鋼板形和表面粗糙度協同控制[J]. 工程科學學報, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

引用本文:

張清東, 王文廣, 吳越, 王慧. 冷軋帶鋼板形和表面粗糙度協同控制[J]. 工程科學學報, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

ZHANG Qingdong, WANG Wenguang, WU Yue, WANG Hui. Coordinated control of flatness and surface roughness of strip on 2030 mm cold tandem mills[J]. Chinese Journal of Engineering, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

Citation:

ZHANG Qingdong, WANG Wenguang, WU Yue, WANG Hui. Coordinated control of flatness and surface roughness of strip on 2030 mm cold tandem mills[J]. Chinese Journal of Engineering, 2005, 27(2): 232-234. doi: 10.13374/j.issn1001-053x.2005.02.056

冷軋帶鋼板形和表面粗糙度協同控制

doi: 10.13374/j.issn1001-053x.2005.02.056

1. 北京科技大學機械工程學院, 北京 100083;
2. 中國人民公安大學, 北京 102614

基金項目:

國家自然科學基金資助項目(No.59835170)

作者簡介:
張清東(1965-),男,研究員,博士

中圖分類號: TG335.11
計量
- 文章訪問數: 150
- HTML全文瀏覽量: 29
- PDF下載量: 7
- 被引次數: 0
出版歷程
- 收稿日期: 2004-04-30
- 修回日期: 2004-07-12
- 網絡出版日期: 2021-08-17

Coordinated control of flatness and surface roughness of strip on 2030 mm cold tandem mills

1. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
2. The Public Security University, Beijing 102614, China

摘要: 為了解決某冷連軋機組在生產實踐中對板形和表面粗糙度協同控制的問題,在大量現場實測與實驗的基礎上,通過研究板形生成規律及帶鋼表面粗糙度形成規律,揭示了板形與表面粗糙度控制中產生矛盾的根源及本質,提出了合理的解決方案,取得了良好的現場應用效果.
- 冷軋帶鋼 /
- 板形 /
- 表面粗糙度 /
- 協同控制
Abstract: The surface roughness and flatness of cold rolled strips are important control aims, especially when cold strip coils are processed in batch-type annealing furnaces. However, it is found that surface roughness control is in contradiction with strip flatness control in the production of 2030 mm cold tandem mills. Based on lots of tests and measurements, originating and developing principles of strip flatness and surface roughness were studied. According to the results of research, solutions for the problem were proposed and proved to be effective in strip production.
- cold rolled strip /
- flatness /
- surface roughness /
- coordinated control

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 150
HTML全文瀏覽量: 29
PDF下載量: 7
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看