反應等離子熔覆（Cr,Fe）<sub>7</sub>C<sub>3</sub>/γ-Fe金屬陶瓷復合材料涂層的耐磨性

劉均波; 王立梅; 黃繼華

doi:10.13374/j.issn1001-053x.2007.01.011

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名

郵箱

手機號碼

標題

留言內容

驗證碼

反應等離子熔覆（Cr,Fe）₇C₃/γ-Fe金屬陶瓷復合材料涂層的耐磨性

doi: 10.13374/j.issn1001-053x.2007.01.011

1. 濰坊學院機電系, 濰坊 261041;
2. 北京科技大學材料科學與工程學院, 北京 100083;
3. 濰坊學院信控系, 濰坊 261041

基金項目:

河南省杰出人才創新基金資助項目(No.0421001000)

詳細信息

作者簡介:
劉均波(1973-),男,博士研究生;黃繼華(1962-),男,教授,博士生導師

中圖分類號: TG174.44
計量
- 文章訪問數: 114
- HTML全文瀏覽量: 31
- PDF下載量: 9
- 被引次數: 0
出版歷程
- 收稿日期: 2005-10-12
- 修回日期: 2006-09-22
- 網絡出版日期: 2021-08-16

Wear properties of reactive plasma clad (Cr,Fe)₇C₃/γ-Fe ceramal composite coatings

1. Department of Mechanical and Electronic Engineering, Weifang University, Weifang 261041, China;
2. Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
3. Department of Information and Control Engineering, Weifang University, Weifang 261061, China

摘要

摘要: 以Fe-Cr-C合金粉末為原料,采用反應等離子熔覆技術,在45^#鋼表面制得以原位生成初生相(Cr,Fe)₇C₃為增強相的新型陶瓷復合材料涂層.利用SEM,XRD,EDS和顯微硬度計等分析了涂層的顯微組織和硬度,分別在室溫干滑動磨損及高溫滑動磨損條件下測試了涂層的耐磨性,并討論了其磨損機理.結果表明,涂層組織包括(Cr,Fe)₇C₃增強相和γ-Fe固溶體與少量(Cr,Fe)₇C₃構成的共晶,該涂層在室溫干滑動磨損和高溫滑動磨損條件下均具有優異的耐磨性.
- 金屬陶瓷復合材料涂層 /
- 反應等離子熔覆 /
- 顯微組織 /
- 耐磨性
Abstract: An in-situ reinforcing phase (Cr,Fe)₇C₃ ceramal composite coating was fabricated on the substrate of a 0.45% carbon steel using Fe-Cr-C elemental powder blending by reactive plasma clad process. The microstructure and micro-hardness of the coating were evaluated by SEM, XRD, EDS and micro-hardness instrument, the room temperature and high temperature wear properties were evaluated under dry sliding wear test conditions, and the wear mechanism was discussed. The results indicated that the reactive plasma clad ceramal composite coating has a rapidly solidified microstructure consisting of primary (Cr,Fe)₇C₃ and (Cr,Fe)₇C₃/γ-Fe eutectics, with excellent wear properties under both room-temperature and high-temperature sliding wear test conditions.
- ceramal composite coating /
- reactive plasma clad /
- microstructure /
- wear properties