斜軋磷銅球成形過程的數值模擬

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

斜軋磷銅球成形過程的數值模擬

周永平, 王寶雨, 胡正寰

文章導航 > 工程科學學報 > 2008 > 30(2): 161-164

周永平, 王寶雨, 胡正寰. 斜軋磷銅球成形過程的數值模擬[J]. 工程科學學報, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

引用本文:

周永平, 王寶雨, 胡正寰. 斜軋磷銅球成形過程的數值模擬[J]. 工程科學學報, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

ZHOU Yongping, WANG Baoyu, HU Zhenghuan. Numerical simulation of copper ball forming process during skew rolling[J]. Chinese Journal of Engineering, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

Citation:

ZHOU Yongping, WANG Baoyu, HU Zhenghuan. Numerical simulation of copper ball forming process during skew rolling[J]. Chinese Journal of Engineering, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

周永平, 王寶雨, 胡正寰. 斜軋磷銅球成形過程的數值模擬[J]. 工程科學學報, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

引用本文:

周永平, 王寶雨, 胡正寰. 斜軋磷銅球成形過程的數值模擬[J]. 工程科學學報, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

ZHOU Yongping, WANG Baoyu, HU Zhenghuan. Numerical simulation of copper ball forming process during skew rolling[J]. Chinese Journal of Engineering, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

Citation:

ZHOU Yongping, WANG Baoyu, HU Zhenghuan. Numerical simulation of copper ball forming process during skew rolling[J]. Chinese Journal of Engineering, 2008, 30(2): 161-164. doi: 10.13374/j.issn1001-053x.2008.02.007

斜軋磷銅球成形過程的數值模擬

doi: 10.13374/j.issn1001-053x.2008.02.007

北京科技大學機械工程學院, 北京 100083

基金項目:

國家自然科學基金資助項目(No.50675019

No.50435010)

作者簡介:
周永平(1978-),女,碩士研究生;王寶雨(1964-),男,研究員,博士

中圖分類號: TG339
計量
- 文章訪問數: 270
- HTML全文瀏覽量: 88
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 2006-11-08
- 修回日期: 2007-01-01
- 網絡出版日期: 2021-08-06

Numerical simulation of copper ball forming process during skew rolling

School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China

摘要: 確定了斜軋磷銅球軋輥孔型曲面方程,通過VC++編程得到軋輥孔型曲面上的特征曲線.利用Pro/E的曲面建模功能建立了軋輥的三維實體幾何模型.利用DEFORM-3D軟件,采用三維剛-塑性有限元法對斜軋磷銅球進行了數值模擬,獲得軋件變形區的應力-應變場分布規律.
- 斜軋 /
- 磷銅球 /
- Pro/E建模 /
- 數值模擬
Abstract: The equation of groove surface for skew rolling copper balls was defined, and the characteristic curves were obtained by VC++ programming. A three-dimensional entity model of the roll was established by Pro/E software. The three-dimensional nonlinear finite element method was used to numerically simulate the metal forming process of copper balls by DEFORM-3D analysis software, and the stress and strain distributions were presented from this simulation.
- skew rolling /
- copper ball /
- Pro/E modeling /
- numerical simulation

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 270
HTML全文瀏覽量: 88
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看