NiTi合金線材無模拉拔加工過程熱力耦合數值模擬

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

NiTi合金線材無模拉拔加工過程熱力耦合數值模擬

畢重武, 何勇, 劉雪峰, 謝建新

文章導航 > 工程科學學報 > 2008 > 30(11): 1249-1254

畢重武, 何勇, 劉雪峰, 謝建新. NiTi合金線材無模拉拔加工過程熱力耦合數值模擬[J]. 工程科學學報, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

引用本文:

畢重武, 何勇, 劉雪峰, 謝建新. NiTi合金線材無模拉拔加工過程熱力耦合數值模擬[J]. 工程科學學報, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

BI Zhongwu, HE Yong, LIU Xuefeng, XIE Jianxin. Thermo-mechanical coupling analysis in the dieless drawing process of NiTi shape memory alloy wires[J]. Chinese Journal of Engineering, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

Citation:

BI Zhongwu, HE Yong, LIU Xuefeng, XIE Jianxin. Thermo-mechanical coupling analysis in the dieless drawing process of NiTi shape memory alloy wires[J]. Chinese Journal of Engineering, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

畢重武, 何勇, 劉雪峰, 謝建新. NiTi合金線材無模拉拔加工過程熱力耦合數值模擬[J]. 工程科學學報, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

引用本文:

畢重武, 何勇, 劉雪峰, 謝建新. NiTi合金線材無模拉拔加工過程熱力耦合數值模擬[J]. 工程科學學報, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

BI Zhongwu, HE Yong, LIU Xuefeng, XIE Jianxin. Thermo-mechanical coupling analysis in the dieless drawing process of NiTi shape memory alloy wires[J]. Chinese Journal of Engineering, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

Citation:

BI Zhongwu, HE Yong, LIU Xuefeng, XIE Jianxin. Thermo-mechanical coupling analysis in the dieless drawing process of NiTi shape memory alloy wires[J]. Chinese Journal of Engineering, 2008, 30(11): 1249-1254. doi: 10.13374/j.issn1001-053x.2008.11.013

NiTi合金線材無模拉拔加工過程熱力耦合數值模擬

doi: 10.13374/j.issn1001-053x.2008.11.013

北京科技大學材料科學與工程學院, 北京 100083

基金項目:

No.50634010

教育部科技創新工程重大項目培育資金資助項目(No.705007)

教育部"新世紀優秀人才支持計劃"資助項目(No.NCET-06-0083)

國家自然科學基金資助項目(No.50474072

國家重點基礎研究發展計劃資助項目(No.2006CB605200)

No.50674008)

作者簡介:
畢重武(1980-),男,碩士研究生;謝建新(1958-),男,教授,博士生導師,E-mail:jxxie@ustb.ed

中圖分類號: TG356.4;TB115
計量
- 文章訪問數: 174
- HTML全文瀏覽量: 25
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 2007-11-23
- 修回日期: 2008-01-14
- 網絡出版日期: 2021-08-06

Thermo-mechanical coupling analysis in the dieless drawing process of NiTi shape memory alloy wires

School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China

摘要: 結合所研制的連續式無模拉拔加工設備的實際情況,利用DEFORM有限元軟件建立了加工過程的熱力耦合有限元分析模型,開展了NiTi合金線材無模拉拔加工過程的熱力耦合模擬研究,獲得了線材無模拉拔加工過程的溫度場和應力場的分布規律,以及冷熱源距離、冷卻水流量及拉拔速度對成品線徑的影響規律.通過實驗驗證了模擬結果的正確性.
- NITI合金 /
- 無模拉拔 /
- 熱力耦合 /
- 數值模擬
Abstract: A thermo-mechanical finite element model was established for the developed continuous dieless drawing process equipment by using DEFORM finite element software. The temperature field and stress field in the continuous dieless drawing process of NiTi shape memory alloy wires were analyzed through the thermo-mechanical coupling simulation. The effects of distance between heater and cooler, cooling water flow-rate and drawing speed on the diameter of wires were investigated. The results were well consistent with the experimental ones.
- NiTi alloy /
- dieless drawing /
- thermo-mechanical coupling /
- numerical simulation

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 174
HTML全文瀏覽量: 25
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看