工業化研制薄板坯連鑄連軋取向電工鋼的組織和性能

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

工業化研制薄板坯連鑄連軋取向電工鋼的組織和性能

安治國, 李陽, 朱國輝, 毛衛民, 杜明山, 姚連勝, 齊長發

文章導航 > 工程科學學報 > 2009 > 31(4): 530-532

安治國, 李陽, 朱國輝, 毛衛民, 杜明山, 姚連勝, 齊長發. 工業化研制薄板坯連鑄連軋取向電工鋼的組織和性能[J]. 工程科學學報, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

引用本文:

安治國, 李陽, 朱國輝, 毛衛民, 杜明山, 姚連勝, 齊長發. 工業化研制薄板坯連鑄連軋取向電工鋼的組織和性能[J]. 工程科學學報, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

AN Zhi-guo, LI Yang, ZHU Guo-hui, MAO Wei-min, DU Ming-shan, YAO Lian-sheng, QI Zhang-fa. Microstructure and properties of grain oriented electrical steel produced commercially by compact strip processing on production lines[J]. Chinese Journal of Engineering, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

Citation:

AN Zhi-guo, LI Yang, ZHU Guo-hui, MAO Wei-min, DU Ming-shan, YAO Lian-sheng, QI Zhang-fa. Microstructure and properties of grain oriented electrical steel produced commercially by compact strip processing on production lines[J]. Chinese Journal of Engineering, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

安治國, 李陽, 朱國輝, 毛衛民, 杜明山, 姚連勝, 齊長發. 工業化研制薄板坯連鑄連軋取向電工鋼的組織和性能[J]. 工程科學學報, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

引用本文:

安治國, 李陽, 朱國輝, 毛衛民, 杜明山, 姚連勝, 齊長發. 工業化研制薄板坯連鑄連軋取向電工鋼的組織和性能[J]. 工程科學學報, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

AN Zhi-guo, LI Yang, ZHU Guo-hui, MAO Wei-min, DU Ming-shan, YAO Lian-sheng, QI Zhang-fa. Microstructure and properties of grain oriented electrical steel produced commercially by compact strip processing on production lines[J]. Chinese Journal of Engineering, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

Citation:

AN Zhi-guo, LI Yang, ZHU Guo-hui, MAO Wei-min, DU Ming-shan, YAO Lian-sheng, QI Zhang-fa. Microstructure and properties of grain oriented electrical steel produced commercially by compact strip processing on production lines[J]. Chinese Journal of Engineering, 2009, 31(4): 530-532. doi: 10.13374/j.issn1001-053x.2009.04.017

工業化研制薄板坯連鑄連軋取向電工鋼的組織和性能

doi: 10.13374/j.issn1001-053x.2009.04.017

1. 北京科技大學新金屬材料國家重點實驗室, 北京 100083;
2. 北京科技大學材料科學與工程學院, 北京 100083;
3. 唐山鋼鐵集團公司技術中心, 唐山 063016

作者簡介:
安治國(1979-),男,博士研究生;毛衛民(1950-),男,教授,博士生導師,E-mail:wmmao@mater.ustb.edu.cn

中圖分類號: TG142.77
計量
- 文章訪問數: 149
- HTML全文瀏覽量: 32
- PDF下載量: 9
- 被引次數: 0
出版歷程
- 收稿日期: 2009-02-25
- 網絡出版日期: 2021-08-09

Microstructure and properties of grain oriented electrical steel produced commercially by compact strip processing on production lines

1. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China;
2. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;
3. Technology Center, Tangshan Iron & Steel Co. Ltd., Tangshan 063016, China

摘要: 采用薄板坯連鑄連軋工業生產設備及常規取向硅鋼生產技術開發了低成本取向硅鋼生產技術,成品性能達到國家牌號標準30Q150.通過適當的熱軋板退火處理可獲得粗大的熱軋板晶粒組織,這有利于促進抑制劑數量的增加及Goss織構的增強,使鋼板磁性能提高到30Q140標準.
- 取向電工鋼 /
- 織構 /
- 薄板坯連鑄連軋
Abstract: A commercial production line of compact strip processing and a production technology for conventional grain oriented electrical steel were used to manufacture low cost grain oriented electrical steel, whose magnetic properties reached the level of 30Q150. Proper hot band annealing was introduced in order to obtain coarse grain size which promoted the strengthening of Goss texture as well as the increasing of inhibitors' number, so that the magnetic properties could reach the level of 30Q140.
- grain oriented electrical steel /
- texture /
- compact strip process

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 149
HTML全文瀏覽量: 32
PDF下載量: 9
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看