連鑄過程板坯展寬矯正的研究

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

連鑄過程板坯展寬矯正的研究

付建勛, 李京社, 張慧, 張興中, 沈昶, 劉學華, 張喬英

文章導航 > 工程科學學報 > 2009 > 31(S1): 173-176

付建勛, 李京社, 張慧, 張興中, 沈昶, 劉學華, 張喬英. 連鑄過程板坯展寬矯正的研究[J]. 工程科學學報, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

引用本文:

付建勛, 李京社, 張慧, 張興中, 沈昶, 劉學華, 張喬英. 連鑄過程板坯展寬矯正的研究[J]. 工程科學學報, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

FU Jian-xun, LI Jing-she, ZHANG Hui, ZHANG Xing-zhong, SHEN Chang, LIU Xue-hua, ZHANG Qiao-ying. Study on the broadening correction of slab in continuous casting[J]. Chinese Journal of Engineering, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

Citation:

FU Jian-xun, LI Jing-she, ZHANG Hui, ZHANG Xing-zhong, SHEN Chang, LIU Xue-hua, ZHANG Qiao-ying. Study on the broadening correction of slab in continuous casting[J]. Chinese Journal of Engineering, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

付建勛, 李京社, 張慧, 張興中, 沈昶, 劉學華, 張喬英. 連鑄過程板坯展寬矯正的研究[J]. 工程科學學報, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

引用本文:

付建勛, 李京社, 張慧, 張興中, 沈昶, 劉學華, 張喬英. 連鑄過程板坯展寬矯正的研究[J]. 工程科學學報, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

FU Jian-xun, LI Jing-she, ZHANG Hui, ZHANG Xing-zhong, SHEN Chang, LIU Xue-hua, ZHANG Qiao-ying. Study on the broadening correction of slab in continuous casting[J]. Chinese Journal of Engineering, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

Citation:

FU Jian-xun, LI Jing-she, ZHANG Hui, ZHANG Xing-zhong, SHEN Chang, LIU Xue-hua, ZHANG Qiao-ying. Study on the broadening correction of slab in continuous casting[J]. Chinese Journal of Engineering, 2009, 31(S1): 173-176. doi: 10.13374/j.issn1001-053x.2009.s1.004

連鑄過程板坯展寬矯正的研究

doi: 10.13374/j.issn1001-053x.2009.s1.004

1. 北京科技大學冶金與生態工程學院, 北京 100083;
2. 焦作大學機電系, 焦作 454000;
3. 中國鋼研集團連鑄技術國家工程研究中心, 北京 100081;
4. 馬鞍山鋼鐵股份公司, 馬鞍山 243003

基金項目:

國家“十一五”科技支撐計劃資助項目(No.2006BAE03A04)

北京市教育委員會共建項目專項資助(2008年北京科技大學)

作者簡介:
付建勛(1969-),男,副教授,博士生,E-mail:Fu-Jianxun@126.com

計量
- 文章訪問數: 249
- HTML全文瀏覽量: 67
- PDF下載量: 4
- 被引次數: 0
出版歷程
- 收稿日期: 2009-05-30
- 網絡出版日期: 2021-08-09

Study on the broadening correction of slab in continuous casting

1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Machinery & Electric Department, University of Jiaozuo, Jiaozuo 454000, China;
3. National Engineering Research Center of Continuous Casting Technology, China Iron & Steel Research Institute Group, Beijing 100081, China;
4. Ma'anshan Iron & Steel Company Ltd., Ma'anshan 243003, China

摘要: 通過對板坯連鑄廠的調查發現連鑄過程中鑄坯的展寬現象在各廠都不同程度地存在,而且通過調整工藝參數來減小鑄坯展寬量的方法不可行.根據結晶器的尺寸與鑄坯展寬的關系,經推導得到矯正鑄坯展寬的結晶器設置公式,結合在鑄機出口位置處在線測量得到的鑄坯寬度,可以算出矯正鑄坯展寬的結晶器參數,從而精確控制鑄坯的寬度.結合馬鞍山鋼鐵公司坯連鑄機的參數給出了一個具體應用實例.
- 連鑄 /
- 鑄坯 /
- 展寬 /
- 結晶器
Abstract: With the investigation of continuous slab casting factory, the slab broadening phenomenon of different degrees in the continuous casting process was found, and the broadening amount could not be corrected through the adjustment of process parameters. According to the correlation between the mould size and slab broadening, the mould setting formulas for correcting the broadening amount were obtained;combined with the width of slab measured at the exit of caster, the mould setting data for correcting the broadening amount could be obtained to control the width of the slab. A specific application is shown combined with the parameters of the secondary continuous slab caster in Ma'anshan Iron and Steel Co., Ltd.
- continuous casting /
- slab /
- broadening /
- mould

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 249
HTML全文瀏覽量: 67
PDF下載量: 4
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

中文字幕在线观看