CaO-MgO-SiO<sub>2</sub>體系鋼渣陶瓷材料制備與微觀結構分析

趙立華; 蒼大強; 劉璞; 白皓; 唐奇

doi:10.13374/j.issn1001-053x.2011.08.001

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名

郵箱

手機號碼

標題

留言內容

驗證碼

CaO-MgO-SiO₂體系鋼渣陶瓷材料制備與微觀結構分析

doi: 10.13374/j.issn1001-053x.2011.08.001

趙立華^1,2, ,,
蒼大強^1,2,
劉璞¹,
白皓^1,2,
唐奇³

1. 北京科技大學高效鋼鐵冶金國家重點實驗室, 北京 100083;
2. 北京科技大學冶金與生態工程學院, 北京 100083;
3. 佛山歐神諾陶瓷股份有限公司, 佛山 528000

基金項目:

廣東省重大基礎科技項目(2009A080203003)

國家自然科學基金重點項目(51034008)

詳細信息

通訊作者:
趙立華,E-mail:zhaolihua@metall.ustb.edu.cn

中圖分類號: TF09
計量
- 文章訪問數: 301
- HTML全文瀏覽量: 97
- PDF下載量: 9
- 被引次數: 0
出版歷程
- 收稿日期: 2011-01-12
- 網絡出版日期: 2021-07-30

Preparation and microstructure analysis of CaO-MgO-SiO₂ steel-slag ceramics

ZHAO Li-hua^{1,2
, ,},
CANG Da-qiang^1,2,
LIU Pu¹,
BAI Hao^1,2,
TANG Qi³

1. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China;
2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
3. Foshan Oceano Ceramic Co. Ltd., Foshan 528000, China

摘要

摘要: 將鋼渣作為陶瓷的燒制原料之一,設計了CaO-MgO-SiO₂體系陶瓷燒制配方,并成功地制備出性能穩定良好的陶瓷材料樣品.樣品的抗彎強度最大可達99.84 MPa.利用掃描電鏡、電子探針微區分析儀和X射線衍射儀等對鋼渣陶瓷制品進行了分析.結果發現:對于CaO-MgO-SiO₂體系,當鋼渣加入量(質量分數)為40%時,主晶相為透輝石-鐵透輝石固溶體;當鋼渣加入量大于65%時,主晶相為鎂黃長石和透輝石.研究表明,采用鋼渣制備陶瓷材料是一種很有潛力的鋼渣高附加值利用技術.
- 鋼渣 /
- 固體廢棄物 /
- 廢物利用 /
- 陶瓷材料 /
- 微觀結構 /
- 透輝石
Abstract: A ceramic with stable and good performances was synthesized by designing the composition of the CaO-MgO-SiO₂ system with steel slag as one of ceramic raw materials.Its bending strength can reach up to 99.84MPa.The ceramic samples were tested and analyzed by scanning electron microscopy(SEM),electron probe microanalysis(EPMA) and X-ray diffraction analysis(XRD).The results show that when the content of steel slag is 40% the dominated crystal phase in the ceramic is a solid solution of diopside and ferric diopside,but when the content of steel slag is higher than 65% the dominated crystal phases are akermanite and diopside.It is indicated that synthesizing a ceramic with steel slag is a promising technology for the utilization of steel slag with high added values.
- steel slag /
- solid wastes /
- waste utilization /
- ceramic materials /
- microstructure /
- diopside