Abstract: The corrosion behavior and electrochemical characteristics of pure Zn and Zn-Al pseudo-alloy coatings in chlorine ioncontaining environment were investigated by salt spray test and electrochemical impedance spectroscopy (EIS). The surface morphologies and phase compositions of the coatings and the corrosion products were analyzed by scanning electron microscopy (SEM) and Xray diffraction (XRD). A preliminary discussion was carried out on the corrosion mechanisms of the two kinds of the coatings. It is found that the corrosion product layer on the pure zinc coating sample is loose and porous with prolonging test time, the main corrosion products are Zn₅(OH)₈Cl₂H₂O, ZnO and Zn₅(CO₃)₂(OH)₆, and some areas in the corrosion product layer have cracked after salt spray testing for 768 h. A compact corrosion product layer forms on the zinc-aluminum pseudo-alloy coating with the time prolonging, and the main corrosion products consist of Zn₅(OH)₈Cl₂H₂O、Zn_0.71Al_0.29(OH)₂(CO₃)_0.145·xH₂O and ZnAl₂O₄. EIS results indicate that the charge transfer resistance of the two coatings increases during the corrosion process. The impedance of the zinc-aluminum pseudo-alloy coating is significantly greater than that of the pure zinc coating, showing a better corrosion resistance.