低溫高磁感取向硅鋼高溫退火過程高斯晶粒的演變

樊立峰; 項利; 唐廣波; 仇圣桃

doi:10.13374/j.issn1001-053x.2014.03.008

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名

郵箱

手機號碼

標題

留言內容

驗證碼

低溫高磁感取向硅鋼高溫退火過程高斯晶粒的演變

doi: 10.13374/j.issn1001-053x.2014.03.008

樊立峰^1,2, ,,
項利^1,2,
唐廣波³,
仇圣桃^1,2

1. 鋼鐵研究總院先進鋼鐵流程及材料國家重點實驗室, 北京 100081;
2. 鋼鐵研究總院連鑄技術國家工程研究中心, 北京 100081;
3. 鋼鐵研究總院特殊鋼研究所, 北京 100081

基金項目:

國家自然科學基金和寶山鋼鐵股份有限公司聯合資助項目（50934009）

詳細信息

通訊作者:
樊立峰,E-mail:fanlifeng829@163.com

中圖分類號: TG142.77
計量
- 文章訪問數: 282
- HTML全文瀏覽量: 82
- PDF下載量: 8
- 被引次數: 0
出版歷程
- 收稿日期: 2012-12-21
- 網絡出版日期: 2021-07-10

Evolution of Goss grains during high-temperature annealing in high permeability grain-oriented silicon steel with slab reheating at low temperature

1. State Key Laboratory of Advanced Steel Processing and Products, Central Iron and Steel Research Institute, Beijing 100081, China;
2. National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China;
3. Research Institute of Special Steel, Central Iron and Steel Research Institute, Beijing 100081, China

摘要

摘要: 對低溫加熱工藝生產的以AlN為主抑制劑的高磁感取向硅鋼高溫退火過程進行中斷實驗，借助電子背散射衍射技術對高溫退火過程中高斯晶粒的演變進行了研究.在升溫過程中高斯晶粒平均尺寸先減小再增大.800℃時取向分布函數圖出現高斯織構組分，但強度很弱，高斯晶粒偏離角在10o以上；900℃時高斯晶粒平均生長速率超過其他晶粒；950~1000℃時高斯晶粒異常長大，偏離角3o~6o；在1000℃之前高斯取向晶粒相比于其他晶粒沒有尺寸優勢.
- 硅鋼 /
- 高斯織構 /
- 退火 /
- 再結晶 /
- 晶粒尺寸
Abstract: The high-temperature annealing process of high permeability grain-oriented silicon steel with AlN as an inhibitor was studied by interrupting test. The evolution of Goss texture in this process was analyzed by electron back-scattered diffraction. It is found that the Goss grain size first decreases and then increases with the rise of temperature. Goss texture appears in the orientation distribution function at 800℃, but the intensity is very weak and the deviation angle is more than 10o. The average growth rate of Goss grains is faster than other grains at 900℃. Goss grains grow abnormally from 950 to 1000℃, and the deviation angle ranges from 3o to 6o. Before 1000℃, in comparison with other grains, Goss grains have no size advantage.
- silicon steel /
- Goss texture /
- annealing /
- recrystallization /
- grain size