脈沖電流對AZ21鎂電極電壓滯后的影響

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名

郵箱

手機號碼

標題

留言內容

驗證碼

基金項目:

材料腐蝕與防護四川省重點實驗室開放基金項目(2014CL12)

國家自然科學基金資助項目(21273292)

Influence of pulse current on the voltage delay of AZ21 magnesium electrode

1. College of Chemistry and Chemical Engineering,Chongqing University, Chongqing 400044, China;
2. College of Material and Chemical Engineering,Sichuan University of Science and Engineering, Zigong 643000, China;
3. Sichuan Provincial Key Laboratory of Materials Corrosion and Protection, Zigong 643000, China

摘要: AZ21鎂合金在硫酸鎂溶液中會產生表面膜,導致嚴重的電壓滯后問題.加載脈沖電流可以減少AZ21鎂合金的滯后時間,縮短放電初期時的電壓降,降低平衡電壓,提高放電平穩性等,有利于AZ21鎂合金在電池中的應用.本文利用恒電流法、多電流階躍法、電化學阻抗、掃描電鏡等多種方法對AZ21鎂合金在2 mol·L^-1的MgSO₄溶液的電壓滯后問題進行實驗研究.結果表明,經50 m A脈沖電流1 s后,AZ21的電壓滯后時間可從6.35 s(3.23 V)降至0.59 s(0.034 V).
- 鎂合金 /
- 表面膜 /
- 電壓 /
- 遲滯 /
- 脈沖電流
Abstract: A surface film generates on AZ21 magnesium alloy in magnesium sulfate solutions,resulting in serious voltage delay.Pulse current is conducive to the application of AZ21 magnesium alloy in a battery,for it can shorten the lag time,reduce the initial discharge voltage drop and increase the discharge stability. The voltage delay of AZ21 magnesium alloy in a 2 mol·L^-1 MgSO₄ solution was investigated by chronopotentiometry,multi-current steps,electrochemical impedance measurement,and scanning electron microscopy. After a 50 mA pulse current was applied for 1 s,the voltage lag time of AZ21 magnesium alloy decreased from 6.35 s(3.23 V) to 0.59 s(0.034 V).
- magnesium alloys /
- surface films /
- voltage /
- delay /
- pulse current