Influence of nano-SiC on the graphitization and oxidation resistance of C/C composites
-
摘要: 本文制備納米SiC基體改性的SiC-C/C復合材料，利用X射線衍射技術、高分辨率透射電鏡等研究SiC對碳材料的石墨化度的影響.納米SiC能夠顯著促進碳基體材料的石墨化度，同時通過高分辨率透射電鏡在納米SiC顆粒周圍觀測到明顯的石墨化結構，并且距離SiC越近，碳基體的石墨化程度越高.通過靜態氧化實驗研究SiC-C/C復合材料的抗氧化性能.結果表明，隨著SiC加入量的增加復合材料的抗氧化性顯著提高，納米SiC在高溫下生成較為均勻的SiO2保護層，覆蓋在碳材料的表面，阻礙氧氣與碳材料的接觸，并且SiC含量越高，形成的保護層越厚，抗氧化能力越強.Abstract: SiC-carbon/carbon (C/C) composites were prepared by doping nano-SiC, and the influence of nano-SiC on the graphitization degree of carbon material was investigated by X-ray diffraction and high-resolution transmission electron microscopy (HRTEM). The nano-SiC can promote the graphitization degree of carbon material. An apparent graphitization structure around the nano SiC was observed by HRTEM, and the carbon material has a higher graphitization degree when it is closer to the nano-SiC. The oxidation resistance of SiC-C/C composites was also studied through static oxidation experiment. It is found that the anti-oxidation performance of C/C composites increases with increasing nano-SiC content, and the nano-SiC forms a uniform SiO2 protective layer at high temperature, which could cover the carbon material surface to prevent the material from oxidation. In addition, the SiO2 protective layer is thicker and has a higher oxidation resistance property when the matrix material contains more nano-SiC.
-
Key words:
- carbon/carbon composites /
- nanoparticles /
- silicon carbide /
- graphitization /
- oxidation resistance
-
參考文獻
[2] Florian M, Carvalho L E, Cairo C A A. SiCf/SiC composite:attainment methods, properties and characterization//Sikalidis C. Advances in Ceramics:Synthesis and Characterization, Processing and Specific Applications. InTech, 2011:173 [4] Roman Y G, Stinton D P. The preparation and economics of silicon carbide matrix composites by chemical vapor infiltration//MRS Proceedings. Cambridge University Press, 1994, 365:343 [6] Sekigawa T, Oguri K, Kochiyama J, et al. Endurance test of oxidation-resistant CVD-SiC coating on C/C composites for space vehicle. Mater Trans, 2001, 42(5):825 [8] Baklanova N I, Kulyukin V N, Kostrovsky V G, et al. High-temperature evolution of Si C/C products derived from preceramic polymers. J Mater Synth Process, 1999, 7(5):289 [9] Staehler J M, Zawada L P. Performance of four ceramic-matrix composite divergent flap inserts following ground testing on an F110 turbofan engine. J Am Ceram Soc, 2000, 83(7):1727 [10] Gee S M, Little J A. Oxidation behaviour and protection of carbon/carbon composites. J Mater Sci, 1991, 26(4):1093 [11] Sogabe T, Nakajima K, Inagaki M. Effect of boron-doping on structure and some properties of carbon-carbon composite. J Mater Sci, 1996, 31(24):6469 [12] Baklanova N I, Zima T M, Titov A T, et al. Microstructure and strength of carbon fibers surface-modified with titanium carbide. Inorg Mater, 2008, 44(2):121 [13] Price E W. History of solid rocket motors//34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Cleveland, 1998 -
點擊查看大圖
計量
- 文章訪問數: 736
- HTML全文瀏覽量: 296
- PDF下載量: 16
- 被引次數: 0
下載:
