Fabrication of a three-dimensional simulated reservoir core model based on area projection micro-stereolithography
-
摘要: 首先搭建具有高精度面投影微立體光刻設備，通過理論分析和實驗相結合的方法獲得最優打印工藝參數，然后提出一種可用于模擬地層巖心的微球堆疊巖心模型，并通過分析巖心模型成型機理，選取具有更高成型精度的堆積方式對巖心模型進行設計。該模擬巖心制造方法具有對特殊巖心結構制造的高適應性，為實驗室顯微鏡下研究多種EOR技術微觀驅替機理提供了新思路。Abstract: Petroleum exploitation plays a very important role in national energy security. With continuous exploitation of oil fields in my country, the efficiency of conventional water injection oil production is decreasing year by year. Enhanced oil recovery (EOR) technologies, such as polymer flooding, microbial flooding, micro–nano flooding, and other flooding technologies have been proposed and developed for application. However, the microscopic displacement mechanism and displacement effect of these technologies are still unclear. Current oil displacement research needs to be verified by core displacement experiments. However, the current displacement experiments all use artificial cores, glass etching channels, photoetched microchannels, etc., as the oil displacement environment. These displacement environments are insufficient in terms of oil displacement dimensions and observation phenomena. Due to this, there is an urgent need for a core manufacturing method that is more suitable for laboratory oil displacement research. In this study, we proposed a method for manufacturing a simulated three-dimensional core structure based on micro-stereolithography technology. This method not only has the advantages of fast manufacturing speed and high forming accuracy, but is also able to realize the visualization, parameterization, and customized design of a micron structure. The core model self-searched by stereo lithography has a three-dimensional pore structure in the order of hundreds of microns and can be used to simulate the experimental study of reservoir displacement flow mechanism. In this research, a high-precision surface projection micro-stereolithography equipment was built, and the optimal printing process parameters were obtained through a combination of theoretical analysis and experiments. Then, a microsphere stacked core model was proposed that can be used to simulate formation cores. By analyzing the forming mechanism of the core model, a stacking method was selected with a higher forming accuracy to design the core model. Finally, the core of a 100-micron-sized microsphere accumulation was realized by micro-stereolithography to achieve three-dimensional molding. The simulated core manufacturing method in this study has high adaptability to special core structure manufacturing and provides a new idea for studying the microscopic displacement mechanism of various EOR technologies under a laboratory microscope.
-
中文字幕在线观看
圖 13 不同材料的微球堆疊巖心模型成型效果. （a）zDental Model沙黃樹脂成型巖心；（b）自配制樹脂體系成型巖心
Figure 13. Forming effect of the core model of microsphere accumulation by different materials: (a) the core of zDental Model sand yellow resin molding; (b) self-prepared resin system forming core
-
參考文獻
[1] Dai C L, Fang J C, Jiao B L, et al. Development of the research on EOR for carbonate fractured-vuggy reservoirs in China. J China Univ Petrol Nat Sci, 2018, 42(6): 67戴彩麗, 方吉超, 焦保雷, 等. 中國碳酸鹽巖縫洞型油藏提高采收率研究進展. 中國石油大學學報(自然科學版), 2018, 42(6):67 [2] Zhu W Y, Yue M, Liu Y F, et al. Research progress on tight oil exploration in China. Chin J Eng, 2019, 41(9): 1103朱維耀, 岳明, 劉昀楓, 等. 中國致密油藏開發理論研究進展. 工程科學學報, 2019, 41(9):1103 [3] Samala R, Chaudhuri A, Vishnudas R, et al. Numerical analysis of viscous fingering and oil recovery by surfactant and polymer flooding in five-spot setup for water and oil-wet reservoirs. Geomech Geophys Geo-Energy Geo-Resour, 2020, 6(1): 3 doi: 10.1007/s40948-019-00124-1 [4] Ma K, Liontas R, Conn C A, et al. Visualization of improved sweep with foam in heterogeneous porous media using microfluidics. Soft Matter, 2012, 8(41): 10669 doi: 10.1039/c2sm25833a [5] Lv Q C, Li Z M, Li B F, et al. Study of nanoparticle-surfactant-stabilized foam as a fracturing fluid. Ind Eng Chem Res, 2015, 54(38): 9468 doi: 10.1021/acs.iecr.5b02197 [6] Olayiwola S O, Dejam M. A comprehensive review on interaction of nanoparticles with low salinity water and surfactant for enhanced oil recovery in sandstone and carbonate reservoirs. Fuel, 2019, 241: 1045 doi: 10.1016/j.fuel.2018.12.122 [7] Hendraningrat L, Li S D, Tors?ter O. A coreflood investigation of nanofluid enhanced oil recovery. J Petrol Sci Eng, 2013, 111: 128 doi: 10.1016/j.petrol.2013.07.003 [8] Guang X J, Dou N H, Jia Y P, et al. Application prospects of nanotechnology in petroleum engineering. Drill Prod Technol, 2019, 42(3): 34 doi: 10.3969/J.ISSN.1006-768X.2019.03.10光新軍, 豆寧輝, 賈云鵬, 等. 納米技術在石油工程中的應用前景. 鉆采工藝, 2019, 42(3):34 doi: 10.3969/J.ISSN.1006-768X.2019.03.10 [9] Hamida T, Babadagli T. Displacement of oil by different interfacial tension fluids under ultrasonic waves. Colloids Surf A, 2008, 316(1-3): 176 doi: 10.1016/j.colsurfa.2007.09.012 [10] Ge D. Study on Stability of ASP Flooding Sludge and Ultrasonic-Demulsification Oil Removal [Dissertation]. Daqing: Northeast Petroleum University, 2018.葛丹. 三元復合驅油泥穩定性及超聲—破乳洗油的研究[學位論文]. 大慶: 東北石油大學, 2018. [11] Liu W. Discussion on application of microbial oil recovery technology in oil exploitation. Chem Eng Des Commun, 2017, 43(7): 63 doi: 10.3969/j.issn.1003-6490.2017.07.060劉衛. 淺談石油開采中微生物采油技術的應用. 化工設計通訊, 2017, 43(7):63 doi: 10.3969/j.issn.1003-6490.2017.07.060 [12] Liu J, Wang C, Sun C Y. Application of microbial flooding in oil fields. Chem Eng Des Commun, 2019, 45(1): 33 doi: 10.3969/j.issn.1003-6490.2019.01.030劉杰, 王超, 孫朝陽. 微生物驅油在油田的應用. 化工設計通訊, 2019, 45(1):33 doi: 10.3969/j.issn.1003-6490.2019.01.030 [13] de Araujo L L G C, Sodré L G P, Brasil L R, et al. Microbial enhanced oil recovery using a biosurfactant produced by Bacillus safensis isolated from mangrove microbiota - Part I biosurfactant characterization and oil displacement test. J Petrol Sci Eng, 2019, 180: 950 doi: 10.1016/j.petrol.2019.06.031 [14] Nazina T, Sokolova D, Grouzdev D, et al. The potential application of microorganisms for sustainable petroleum recovery from heavy oil reservoirs. Sustainability, 2020, 12(1): 15 [15] Haq B, Liu J S, Liu K Y, et al. The role of biodegradable surfactant in microbial enhanced oil recovery. J Petrol Sci Eng, 2020, 189: 106688 doi: 10.1016/j.petrol.2019.106688 [16] Dong X Q, Ma X Y. Technical measures for three-stage oil recovery. Chem Eng Des Commun, 2017, 43(7): 42 doi: 10.3969/j.issn.1003-6490.2017.07.039董喜慶, 馬曉燕. 三次采油工藝技術措施. 化工設計通訊, 2017, 43(7):42 doi: 10.3969/j.issn.1003-6490.2017.07.039 [17] Xu L. Pore Network Model Construction of Sandstone Reservoir and Application [Dissertation]. Chengdu: Southwest Petroleum University, 2015.許麗. 砂巖油藏孔隙網絡模型構造及應用研究[學位論文]. 成都: 西南石油大學, 2015. [18] Sun Z. A method of extracting pore date of tight sandstone based on 3D CT scanning image. J North China Inst Sci Technol, 2020, 17(1): 6 doi: 10.3969/j.issn.1672-7169.2020.01.002孫澤. 基于三維CT掃描圖像的致密砂巖孔隙數據提取方法. 華北科技學院學報, 2020, 17(1):6 doi: 10.3969/j.issn.1672-7169.2020.01.002 [19] Abgrall P, Gue A M. Lab-on-chip technologies: making a microfluidic network and coupling it into a complete microsystem—a review. J Micromech Microeng, 2007, 17(5): R15 doi: 10.1088/0960-1317/17/5/R01 [20] Xu K, Zhu P X, Huh C, et al. Microfluidic investigation of nanoparticles' role in mobilizing trapped oil droplets in porous media. Langmuir, 2015, 31(51): 13673 doi: 10.1021/acs.langmuir.5b03733 [21] Beauchamp M J, Nordin G P, Woolley A T. Moving from millifluidic to truly microfluidic sub-100-μm cross-section 3D printed devices. Anal Bioanal Chem, 2017, 409: 4311 doi: 10.1007/s00216-017-0398-3 [22] Vavra E D, Zeng Y C, Xiao S Y, et al. Microfluidic devices for characterizing pore-scale event processes in porous media for oil recovery applications. J Vis Exp, 2018, 131: e56592 [23] Li H X, Zhang T J. Imaging and characterizing fluid invasion in micro-3D printed porous devices with variable surface wettability. Soft Matter, 2019, 15(35): 6978 doi: 10.1039/C9SM01182J [24] Huang D L. Study of the Fluid Flow in Ultra-low Permeability Reservoir with Fractures and its Application at Daqing Olifield [Dissertation]. Daqing: Daqing Petroleum Institute, 2010.黃德利. 大慶油田特低滲透裂縫性油藏滲流特征研究及應用[學位論文]. 大慶: 大慶石油學院, 2010. [25] Ding X Y. Pore Structure Characteristics of F Oil Reservoir in Daqing and the Impact on the Seepage [Dissertation]. Daqing: Northeast Petroleum University, 2013.丁先運. 大慶F油層巖石孔隙結構特征及對滲流影響[學位論文]. 大慶: 東北石油大學, 2013 -
下載:
點擊查看大圖
圖(13)
計量
- 文章訪問數: 1696
- HTML全文瀏覽量: 1049
- PDF下載量: 78
- 被引次數: 0
