A Study on the Plastic Deformation During Rolling by Visioplasticity Method

Liu Xiaoping; He Yuxin

doi:10.13374/j.issn1001-053x.1983.03.011

Volume 5 Issue 3

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1983 > 5(3): 102-111

Liu Xiaoping, He Yuxin. A Study on the Plastic Deformation During Rolling by Visioplasticity Method[J]. Chinese Journal of Engineering, 1983, 5(3): 102-111. doi: 10.13374/j.issn1001-053x.1983.03.011

Citation:

Liu Xiaoping, He Yuxin. A Study on the Plastic Deformation During Rolling by Visioplasticity Method[J]. Chinese Journal of Engineering, 1983, 5(3): 102-111. doi: 10.13374/j.issn1001-053x.1983.03.011

Liu Xiaoping, He Yuxin. A Study on the Plastic Deformation During Rolling by Visioplasticity Method[J]. Chinese Journal of Engineering, 1983, 5(3): 102-111. doi: 10.13374/j.issn1001-053x.1983.03.011

Citation:

PDF( 649 KB)

A Study on the Plastic Deformation During Rolling by Visioplasticity Method

doi: 10.13374/j.issn1001-053x.1983.03.011

Received Date: 1982-11-08
Available Online: 2021-11-15

Abstract

Abstract

Using Visioplasticity method,the flow and deformation of rolling process have been studied.The main conclusions are as follows:
1. Visioplasticity method is usefal for analyzing flow and deformation of metals during rolling.
2. The deformation and flow of metal are not homogeneous.
3. Correct results can be obtained if there is suitable method to determine the flow lines.