Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer

Lai Senhua; Huang Cunshao; Tong Guangxu

doi:10.13374/j.issn1001-053x.1987.s2.015

Volume 9 Issue S2

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1987 > 9(S2): 8-16

Lai Senhua, Huang Cunshao, Tong Guangxu. Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer[J]. Chinese Journal of Engineering, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

Citation:

Lai Senhua, Huang Cunshao, Tong Guangxu. Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer[J]. Chinese Journal of Engineering, 1987, 9(S2): 8-16. doi: 10.13374/j.issn1001-053x.1987.s2.015

Citation:

PDF( 676 KB)

Optimizing the Operating Parameters for Vibrating Feeders by Means of Electronic Computer

doi: 10.13374/j.issn1001-053x.1987.s2.015

Available Online: 2021-10-28

Abstract

Abstract

After analyzing the dynamic properties of vibrating drawing system, the loading capacity, unit energy comsumption and interfere strength of vibrated material have been put forwards as the indexes evaluating the loading effect of vibrating feeder.For both uniaxial and biaxial vibrating feeders, the optimization of operating parameters has been completed by means of the electronic computer.The results of our model tests show that the operating parameters optimized for the feeders and the formulas about them are dependable and easy to carry out.
- vibrating drawing,
- operating parameter,
- optimizing by electronic computer,
- model test