Evaluation and Development of Hon-sai Model

Gao Yongsheng; Sun Zhanjun; Zou Jiaxiang

doi:10.13374/j.issn1001-053x.1991.01.022

Volume 13 Issue 1

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1991 > 13(1): 10-14

Gao Yongsheng, Sun Zhanjun, Zou Jiaxiang. Evaluation and Development of Hon-sai Model[J]. Chinese Journal of Engineering, 1991, 13(1): 10-14. doi: 10.13374/j.issn1001-053x.1991.01.022

Citation:

Gao Yongsheng, Sun Zhanjun, Zou Jiaxiang. Evaluation and Development of Hon-sai Model[J]. Chinese Journal of Engineering, 1991, 13(1): 10-14. doi: 10.13374/j.issn1001-053x.1991.01.022

Gao Yongsheng, Sun Zhanjun, Zou Jiaxiang. Evaluation and Development of Hon-sai Model[J]. Chinese Journal of Engineering, 1991, 13(1): 10-14. doi: 10.13374/j.issn1001-053x.1991.01.022

Citation:

Gao Yongsheng, Sun Zhanjun, Zou Jiaxiang. Evaluation and Development of Hon-sai Model[J]. Chinese Journal of Engineering, 1991, 13(1): 10-14. doi: 10.13374/j.issn1001-053x.1991.01.022

PDF( 430 KB)

Evaluation and Development of Hon-sai Model

doi: 10.13374/j.issn1001-053x.1991.01.022

Department of Mechanical Engineering

Received Date: 1990-09-10
Available Online: 2021-10-23

Abstract

Abstract

This paper emphatically discusses the influence of the roll crown on the deformation of the roll system and the rolling pressure, and the corrected equations are verified by test, shows their arailablity in practical engineering.
- bending force,
- roll crown,
- rolling pressure,
- Hon-sai model