Analysis of Large Tie Rod with Finite Element Method

Zhang Shaojun; Li Mouwei

doi:10.13374/j.issn1001-053x.1994.s2.004

Volume 16 Issue S2

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1994 > 16(S2): 14-18

Zhang Shaojun, Li Mouwei. Analysis of Large Tie Rod with Finite Element Method[J]. Chinese Journal of Engineering, 1994, 16(S2): 14-18. doi: 10.13374/j.issn1001-053x.1994.s2.004

Citation:

Zhang Shaojun, Li Mouwei. Analysis of Large Tie Rod with Finite Element Method[J]. Chinese Journal of Engineering, 1994, 16(S2): 14-18. doi: 10.13374/j.issn1001-053x.1994.s2.004

Zhang Shaojun, Li Mouwei. Analysis of Large Tie Rod with Finite Element Method[J]. Chinese Journal of Engineering, 1994, 16(S2): 14-18. doi: 10.13374/j.issn1001-053x.1994.s2.004

Citation:

Zhang Shaojun, Li Mouwei. Analysis of Large Tie Rod with Finite Element Method[J]. Chinese Journal of Engineering, 1994, 16(S2): 14-18. doi: 10.13374/j.issn1001-053x.1994.s2.004

PDF( 406 KB)

Analysis of Large Tie Rod with Finite Element Method

doi: 10.13374/j.issn1001-053x.1994.s2.004

Mechanical Engineering college, USTB, Beijing 100083, PRC

Received Date: 1994-03-01
Available Online: 2021-11-13

Abstract

Abstract

Distributive patterns of the stress and deformation For the large tie rod of the 1000t floating axle shear have been studied, with the contact load being even distribued and being distributed to lodder-type on the thickness of the holes at the both ends of the tie rod by the space substance elements with 20 joints.
- tie rods,
- connecting,
- finite elements,
- shears