Application of CAD/CAM in Metallurgy

Wang Hongshui

doi:10.13374/j.issn1001-053x.1994.s3.037

Volume 16 Issue S3

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1994 > 16(S3): 6-10

Wang Hongshui. Application of CAD/CAM in Metallurgy[J]. Chinese Journal of Engineering, 1994, 16(S3): 6-10. doi: 10.13374/j.issn1001-053x.1994.s3.037

Citation:

Wang Hongshui. Application of CAD/CAM in Metallurgy[J]. Chinese Journal of Engineering, 1994, 16(S3): 6-10. doi: 10.13374/j.issn1001-053x.1994.s3.037

Wang Hongshui. Application of CAD/CAM in Metallurgy[J]. Chinese Journal of Engineering, 1994, 16(S3): 6-10. doi: 10.13374/j.issn1001-053x.1994.s3.037

Citation:

Wang Hongshui. Application of CAD/CAM in Metallurgy[J]. Chinese Journal of Engineering, 1994, 16(S3): 6-10. doi: 10.13374/j.issn1001-053x.1994.s3.037

PDF( 426 KB)

Application of CAD/CAM in Metallurgy

doi: 10.13374/j.issn1001-053x.1994.s3.037

Wang Hongshui

Received Date: 1994-07-10
Available Online: 2021-11-13

Abstract

Abstract

A CIMS which is composed of four-level computer system realizaed CAD,CAM, CAPP and CAPM corresponding to the system is concluded. With the help of computer system and integrated ability of technology and facility, and also based on CAD/CAM,FMS is achieved to ensure that the order requirement of each customer can be satisfied during the process of mass production. MRP-Ⅱ in this system has programmed the material supply of former section based on the principle ‘Just in time’. This system is still marching for higher level of CIMS.
- CAD,
- CAM,
- CAPP,
- FMS