Incremental Melting and Solidification Molding Process

Jia Chengchang; Nobuyoshi Sasaki

doi:10.13374/j.issn1001-053x.1996.05.009

Volume 18 Issue 5

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1996 > 18(5): 436-439

Jia Chengchang, Nobuyoshi Sasaki. Incremental Melting and Solidification Molding Process[J]. Chinese Journal of Engineering, 1996, 18(5): 436-439. doi: 10.13374/j.issn1001-053x.1996.05.009

Citation:

Jia Chengchang, Nobuyoshi Sasaki. Incremental Melting and Solidification Molding Process[J]. Chinese Journal of Engineering, 1996, 18(5): 436-439. doi: 10.13374/j.issn1001-053x.1996.05.009

Jia Chengchang, Nobuyoshi Sasaki. Incremental Melting and Solidification Molding Process[J]. Chinese Journal of Engineering, 1996, 18(5): 436-439. doi: 10.13374/j.issn1001-053x.1996.05.009

Citation:

Jia Chengchang, Nobuyoshi Sasaki. Incremental Melting and Solidification Molding Process[J]. Chinese Journal of Engineering, 1996, 18(5): 436-439. doi: 10.13374/j.issn1001-053x.1996.05.009

PDF( 351 KB)

Incremental Melting and Solidification Molding Process

doi: 10.13374/j.issn1001-053x.1996.05.009

Jia Chengchang¹,
Nobuyoshi Sasaki²

1. Department of Materials Science and Engineering USTB, Beijing, 100083, PRC;
2. CADIC Corporation, Kawasaki, 213, Japan

Received Date: 1995-11-12
Available Online: 2021-11-13

Abstract

Abstract

The material in mold is melt by using induction heating and maintained a small height. Incrementally melting and solidification take place from bottom to top, by the motion between mold and heating source, reaching the molding purpose. This process can reach a near net shape and get excellent properties.
- incremental melting and solidification molding process,
- lnduction heating,
- near net shape