Model of the Spray Forming Process

Fu Xiaowei; Zhang Jishan; Sun Zuqing

doi:10.13374/j.issn1001-053x.1997.01.013

Volume 19 Issue 1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1997 > 19(1): 63-67

Fu Xiaowei, Zhang Jishan, Sun Zuqing. Model of the Spray Forming Process[J]. Chinese Journal of Engineering, 1997, 19(1): 63-67. doi: 10.13374/j.issn1001-053x.1997.01.013

Citation:

Fu Xiaowei, Zhang Jishan, Sun Zuqing. Model of the Spray Forming Process[J]. Chinese Journal of Engineering, 1997, 19(1): 63-67. doi: 10.13374/j.issn1001-053x.1997.01.013

Fu Xiaowei, Zhang Jishan, Sun Zuqing. Model of the Spray Forming Process[J]. Chinese Journal of Engineering, 1997, 19(1): 63-67. doi: 10.13374/j.issn1001-053x.1997.01.013

Citation:

Fu Xiaowei, Zhang Jishan, Sun Zuqing. Model of the Spray Forming Process[J]. Chinese Journal of Engineering, 1997, 19(1): 63-67. doi: 10.13374/j.issn1001-053x.1997.01.013

PDF( 426 KB)

Model of the Spray Forming Process

doi: 10.13374/j.issn1001-053x.1997.01.013

State Key Laboratory of Advanced Metals and Materials, UST Beijing, Beijing 100083, China

Received Date: 1996-10-29
Available Online: 2021-08-27

Abstract

Abstract

The spray forming process is simulated. The in-flight dynamical and thermal histories of the droplets during forming process are described. The relation of the independent parameters such as vilocity, temperature, and solid fraction of the droplets to the melt superheat and the gas velocity is established. Based on the calculation of Al-4.5%Cu alloy, the effect of some dependent parameters on the process are discussed.
- spray forming,
- solidification,
- model