Optimization of Submerged Entry Nozzle of Thin-Slab Continuous Casting

Bao Yanping; Zhu Sansheng; Tian Naiyuan; Xu Baomei

doi:10.13374/j.issn1001-053x.1999.02.039

Volume 21 Issue 2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1999 > 21(2): 135-137

Bao Yanping, Zhu Sansheng, Tian Naiyuan, Xu Baomei. Optimization of Submerged Entry Nozzle of Thin-Slab Continuous Casting[J]. Chinese Journal of Engineering, 1999, 21(2): 135-137. doi: 10.13374/j.issn1001-053x.1999.02.039

Citation:

Bao Yanping, Zhu Sansheng, Tian Naiyuan, Xu Baomei. Optimization of Submerged Entry Nozzle of Thin-Slab Continuous Casting[J]. Chinese Journal of Engineering, 1999, 21(2): 135-137. doi: 10.13374/j.issn1001-053x.1999.02.039

Citation:

PDF( 340 KB)

Optimization of Submerged Entry Nozzle of Thin-Slab Continuous Casting

doi: 10.13374/j.issn1001-053x.1999.02.039

Metallurgy School, UST Beijing, Beijing 100083, China

Received Date: 1998-11-10
Available Online: 2021-08-27

Abstract

Abstract

In accordance with the thin-slab caster mould of Lanzhou I&S Co., the effects of structure, immersion depth, outlet angle and shape on the fluid flow in mould by visualizing the fluid flow and measuring the wave amplitude and impetus under high speed casting have been studied. The results can provide theoretical foundation for choosing reasonable structure of SEN.
- thin-slab continuous casting,
- signal-noise ratio,
- submerged entry nozzle,
- water model study