Deformation Characteristic of Drawing Flux-cored Welding Wires with Roller Dies

Zheng Baolong; Liu Yazheng; Xue Liping; Zhang Xiangkun

doi:10.13374/j.issn1001-053x.1999.04.013

Volume 21 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1999 > 21(4): 362-364

Zheng Baolong, Liu Yazheng, Xue Liping, Zhang Xiangkun. Deformation Characteristic of Drawing Flux-cored Welding Wires with Roller Dies[J]. Chinese Journal of Engineering, 1999, 21(4): 362-364. doi: 10.13374/j.issn1001-053x.1999.04.013

Citation:

Zheng Baolong, Liu Yazheng, Xue Liping, Zhang Xiangkun. Deformation Characteristic of Drawing Flux-cored Welding Wires with Roller Dies[J]. Chinese Journal of Engineering, 1999, 21(4): 362-364. doi: 10.13374/j.issn1001-053x.1999.04.013

Citation:

PDF( 372 KB)

Deformation Characteristic of Drawing Flux-cored Welding Wires with Roller Dies

doi: 10.13374/j.issn1001-053x.1999.04.013

1. Material Science and Engineering School, UST Beijing, Beijing 100083, China;
2. Department of Mechanical Engineering, Qinghua University, 100084

Received Date: 1998-10-22
Available Online: 2021-08-27

Abstract

Abstract

Based on the experiments with MTS material testing machine, the characters of the deformation and technology in drawing flux-cored welding wires through conventional dies and roller dies have been analyzed. Experiment data about deformation parameters, force and engrgy parameters, powder flow, lubricating, et al. is obtained.Good foring ability and deformation distribution which decreases drawing force are proposed in roller dies drawing.
- flux-cored welding wire,
- roller dies,
- drawing,
- deformation