Water Modeling Research on Slag-Entrapment in the Mould of Thin Slab Continuous Caster

Bao Yanping; Zhu Jianqiang; Jiang Wei; Wang Changxu; Tian Naiyuan; Xu Baomei

doi:10.13374/j.issn1001-053x.1999.06.006

Volume 21 Issue 6

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1999 > 21(6): 530-534

Bao Yanping, Zhu Jianqiang, Jiang Wei, Wang Changxu, Tian Naiyuan, Xu Baomei. Water Modeling Research on Slag-Entrapment in the Mould of Thin Slab Continuous Caster[J]. Chinese Journal of Engineering, 1999, 21(6): 530-534. doi: 10.13374/j.issn1001-053x.1999.06.006

Citation:

Bao Yanping, Zhu Jianqiang, Jiang Wei, Wang Changxu, Tian Naiyuan, Xu Baomei. Water Modeling Research on Slag-Entrapment in the Mould of Thin Slab Continuous Caster[J]. Chinese Journal of Engineering, 1999, 21(6): 530-534. doi: 10.13374/j.issn1001-053x.1999.06.006

Citation:

PDF( 547 KB)

Water Modeling Research on Slag-Entrapment in the Mould of Thin Slab Continuous Caster

doi: 10.13374/j.issn1001-053x.1999.06.006

Metallurgy School, UST Beijing, Beijing 100083, China

Received Date: 1999-07-05
Available Online: 2021-08-27

Abstract

Abstract

Based on the Similarity criteria, series water modeling experiments have been carried out to investigate the mechanisms of powder entrapment in the mould of thin slab continuous caster. SG200 hydraulic experiment system was applied to measure the wave amplitude. The main mode of the powder entraps into the steel and the influences of the technique parameter to entrap depth and mode have been obtained.
- thin slab continuous casting,
- water-modeling,
- mould,
- mould powder entrapment