Study on the Cold Rolled Strip Global and Local Buckling, Post-buckling Using the Finite Element Method

QING Weijie; YANG Quan

doi:10.13374/j.issn1001-053x.2000.04.056

Volume 22 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2000 > 22(4): 377-380

QING Weijie, YANG Quan. Study on the Cold Rolled Strip Global and Local Buckling, Post-buckling Using the Finite Element Method[J]. Chinese Journal of Engineering, 2000, 22(4): 377-380. doi: 10.13374/j.issn1001-053x.2000.04.056

Citation:

QING Weijie, YANG Quan. Study on the Cold Rolled Strip Global and Local Buckling, Post-buckling Using the Finite Element Method[J]. Chinese Journal of Engineering, 2000, 22(4): 377-380. doi: 10.13374/j.issn1001-053x.2000.04.056

Citation:

PDF( 431 KB)

Study on the Cold Rolled Strip Global and Local Buckling, Post-buckling Using the Finite Element Method

doi: 10.13374/j.issn1001-053x.2000.04.056

Mechanical Engineering School, UST Beijing, Beijing, 100083, China

Received Date: 1999-10-28
Available Online: 2021-08-27

Abstract

Abstract

Using the ANSYS finite element method, a series of planar models was put forward to analyze and calculate strip buckling, post-buckling on the condition of the different typical shape shape stress and the different ratio of strip width to gauge. The control target model of strip flatness control was found and the calculated result show that the efficiency of model has been proved.
- cold rolling,
- wide strip,
- buckling,
- finite element method,